camlog® prosthetics
camlog® prosthetics
camlog® prosthetics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CAMLOG ® Abutments with K Article Number<br />
(K-Series)<br />
The abutments are tubular and extended toward the apex<br />
(5.4 mm) and have three cams in the upper area that correspond<br />
to the three grooves in the implant.<br />
All CAMLOG ® abutments of the K-Series have shortened cams<br />
that fit into the shortened grooves of the CAMLOG ® SCREW-<br />
LINE implants and are also compatible with the CAMLOG ®<br />
ROOT-LINE implants.<br />
Short cam geometry (K-Series)<br />
When inserting the abutments, their tubular extension toward<br />
the apex affects the simple, easy and safe orientation in the<br />
longitudinal axis before the three cams rest on the shoulder<br />
of the implant. The abutment is rotated until perceptible engagement<br />
of the cams into the grooves of the implant. The<br />
abutment is then in the final position.<br />
The implant-abutment connection of the CAMLOG ® Implant<br />
System is predominantly a form-fitting connection. The connection<br />
with the short cam geometry has been optimized biomechanically<br />
by means of extensive finite element analyses.<br />
The figure below shows the distribution of the von Mises tension<br />
in the implant-abutment connection at a load in accordance<br />
to ISO 14801 with 200 N.<br />
THE CAMLOG ® CAMLOG<br />
IMPLANT SYSTEM<br />
SYSTEM INFORMATION<br />
® IMPLANT SYSTEM<br />
CAMLOG ® Healing caps<br />
The various healing caps are used for single-stage or two-stage<br />
procedures based on the indication. The CAMLOG ® healing<br />
caps are available in three geometries (cylindrical, wide body<br />
and bottleneck).<br />
CAMLOG ® healing caps PS (cylindrical, wide body and bottleneck)<br />
for Platform Switching are also available.<br />
The CAMLOG ® healing caps PS must only be used with<br />
CAMLOG ® implants of the SCREW-LINE with K article<br />
number (K-Series).<br />
CAMLOG ® bar and ball abutments,<br />
Locator ® abutments<br />
These abutments differ from regular abutments through an<br />
apical thread that attaches into the upper or lower (implants<br />
with Ø 3.3 mm) implant inner thread. For hybrid <strong>prosthetics</strong>,<br />
CAMLOG ® bar, ball and Locator ® abutments are available<br />
that do not have cams due to their function.<br />
CAMLOG ® bar, ball and Locator ® abutment<br />
9
Change language