camlog® prosthetics

Art. No. Article Ø
in mm
K1052.3311
K1052.3313
K1052.3316
K1052.3809
K1052.3811
K1052.3813
K1052.3816
K1052.4309
K1052.4311
K1052.4313
K1052.4316
K1052.5009
K1052.5011
K1052.5013
K1052.5016
K1052.6009
K1052.6011
K1052.6013
K1052.6016
All CAMLOG ® implants are packed sterile.
CAMLOG ® IMPLANT SYSTEM
SURGERY SCREW-LINE
CAMLOG ® SCREW-LINE IMPLANTS PROMOTE ® PLUS
CAMLOG ® SCREW-LINE
Implant, Promote ® plus
incl. insertion post
and cover screw
K-Series
The Promote ® surface has proven its worth as a reliable dental implant surface. Numerous scientific studies demonstrate this. To
provide the bone with a larger rough surface as an anchor, the Promote ® plus area of CAMLOG ® SCREW-LINE implants Promote ®
plus was increased by an additional portion of 1.0 mm, right up to the bone-soft tissue margin compared to the Promote ®
surface. This extends the bone-implant contact surface of Promote ® plus upward to the esthetically relevant coronal zone. Since
they have the same insertion protocol, Promote ® and Promote ® plus implants can be used freely in combination.
Note: With CAMLOG ® SCREW-LINE implants with diameter 3.8/4.3/5.0/6.0 mm the option of Platform Switching
is possible. See also informations on page 8.
3.3
3.8
4.3
5.0
6.0
Length
in mm
11
13
16
9
11
13
16
9
11
13
16
9
11
13
16
9
11
13
16
Material
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Titanium Grade 4
Surface: Promote ®
19