camlog® prosthetics
camlog® prosthetics
camlog® prosthetics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CAMLOG ® IMPLANT SYSTEM<br />
CAMLOG ® PROSTHETICS<br />
IMPRESSION TAKING, BITE REGISTRATION, FABRICATION OF THE PLASTER MODEL<br />
Art. No. Article Ø<br />
in mm<br />
CAMLOG ® Impression post, closed tray<br />
Dimension<br />
in mm<br />
IMPRESSION TAKING<br />
Material<br />
K2110.3300 CAMLOG ® Impression post,<br />
closed tray,<br />
incl. impression cap, bite<br />
3.3 – Titanium alloy<br />
K2110.3800 registration cap and fixing screw,<br />
prosthetic height 10.7 mm<br />
3.8 – Titanium alloy<br />
K2110.4300 4.3 – Titanium alloy<br />
K2110.5000 5.0 – Titanium alloy<br />
K2110.6000 6.0 – Titanium alloy<br />
CAMLOG ® Impression post PS, closed tray, for Platform Switching<br />
K2109.3800 CAMLOG ® Impression post PS,<br />
closed tray,<br />
incl. impression cap, bite<br />
3.8 – Titanium alloy<br />
K2109.4300 registration cap and fixing screw,<br />
prosthetic height 10.7 mm<br />
4.3 – Titanium alloy<br />
PS<br />
K2109.5000 5.0 – Titanium alloy<br />
K2109.6000 6.0 – Titanium alloy<br />
Note: CAMLOG ® Impression posts PS should only be used for impression taking on CAMLOG ® SCREW-LINE<br />
implants with K article number!<br />
Spare impression cap for impression post, closed tray<br />
J2111.3300 Impression cap,<br />
(5 units)<br />
3.3 – POM<br />
J2111.3800 3.8 – POM<br />
J2111.4300 4.3 – POM<br />
J2111.5000 5.0 – POM<br />
J2111.6000 6.0 – POM<br />
POM: Polyoxymethylene<br />
55