camlog® prosthetics

THE CAMLOG ® CAMLOG
IMPLANT SYSTEM
SYSTEM INFORMATION
® IMPLANT SYSTEM
PROSTHETIC RESTORATIONS
CAMLOG ® implants can be provided with a pallet of wide-ranging,
anatomically appropriate prosthetic components. Esthetic
solutions are easily achievable. Nearly all CAMLOG ® abutments
are color-coded corresponding to implant diameters.
CAMLOG ® Abutments for crown and bridge
restorations
● CAMLOG ® Temporary abutment
● CAMLOG ® Temporary abutment PS for Platform Switching
● CAMLOG ® Esthomic ® abutments
● CAMLOG ® Esthomic ® abutments PS for Platform Switching
● CAMLOG ® Universal abutment
● CAMLOG ® Universal abutment PS for Platform Switching
● CAMLOG ® Gold-plastic abutment
● CAMLOG ® Titanium base CAD/CAM
● CAMLOG ® Ceramic abutment
● CAMLOG ® Logfit ® abutment
● CAMLOG ® Vario SR abutments
CAMLOG ® Abutments for hybrid restorations
● CAMLOG ® Bar abutment
● CAMLOG ® Ball abutment
● CAMLOG ® Locator ® abutment
● CAMLOG ® Universal and telescope abutment
● CAMLOG ® Vario SR abutments
CAMLOG ® Temporary abutment
The temporary abutments (PEEK material) can be used after
immediate implantation or after opening for temporary restoration.
Optionally, temporary abutments and temporary abutments
PS for Platform Switching are available for CAMLOG ®
SCREW-LINE implants.
CAMLOG ® Esthomic ® abutments
The abutments of the Esthomic ® line have an anatomical
shaped shoulder and are available in various gingival heights.
● CAMLOG ® Esthomic ® abutment, straight
● CAMLOG ® Esthomic ® abutment, 15° angled,
in type A and B
● CAMLOG ® Esthomic ® abutment, 20° angled,
in type A and B
● CAMLOG ® Esthomic ® abutment, inset
After fabricating the master model, the suitable CAMLOG ® Esthomic
® abutments can be quickly and easily selected using the
color-coded CAMLOG ® Esthomic ® selection abutments in the
dental laboratory. There is no longer any need for expensive
and complicated storage of abutments, either by the dentist or
at the prosthodontist or dental laboratory.
Angled CAMLOG ® Esthomic ® abutments, type A and B
Angled abutments type A and B are available in the Esthomic ®
line of abutments. Type A has a cam opposing the angle direction.
In contrast to type A, type B has a 60° offset cam. Both
types make six different rotation positions possible to achieve
an optimal prosthetic axis alignment.
10
Type A
Cam alignment
against the angle
Type B
Cam alignment in
direction to the angle
Type A Type B
Cam with 60° offset
CAMLOG ® Vario SR abutments
CAMLOG ® Vario SR abutments are available in straight, in
20° and 30° angled versions. These abutments can compensate
for large implant axis divergences. Prefabricated Vario SR
prosthetic components make fabrication of occlusally screwretained
crown, bridge and bar restorations possible. Burnout
plastic copings can be used to fabricate cast crown and
bridge restorations. The titanium caps have a retention surface
on the outside and are designed for temporary or final
bridge restorations made of plastic. Titanium bases for bar are
available for laser-welded bar restorations.
Surgical instruments
The surgical instruments are matched to the individual implant
lines and are color-coded to match the diameter of the
implant.
For a simple overview and handling, autoclavable surgery sets
are available for the respective implant lines with all required
instruments. The instruments are sorted and marked in the set
based on the sequence during implant bed preparation.
The different implant types can generally be inserted transgingivally
(single-stage) or subgingivally (two-stage) based
on the indication. See also indication description in the respective
instruction manual.
60°