Instruction manual - Emotron

Position
for 003-
074
10 - Painted AC drive A=Standard paint
11 11
Coated boards,
option
- =Standard boards
V=Coated boards
12 12 Option position 1 N=No option
13 13 Option position 2
C=Crane I/O
E=Encoder
P=PTC/PT100
14 14 Option position 3
I=Extended I/O
S=Safe Stop (only
003-074)
15 15
Option position,
communication
N=No option
D=DeviceNet
P=Profibus
S=RS232/485
M=Modbus/TCP
E= EtherCAT
A=Profinet IO 1-port
B=Profinet IO 2-port
16 16 Software type A=Standard
17 -
18 -
Position
for 090-
3K0
Configuration
Motor PTC. (Only
valid for 003-074)
Gland kit.
(Only valid for
003-074)
N=No option
P=PTC
–=Glands not
included
G=Gland kit
included
1.5 Standards
The AC drives described in this instruction manual comply
with the standards listed in Table 1. For the declarations of
conformity and manufacturer’s certificate, contact your
supplier for more information or visit www.emotron.com/
www.cgglobal.com.
1.5.1Product standard for EMC
Product standard EN(IEC)61800-3, second edition of 2004
defines the:
First Environment (Extended EMC) as environment that
includes domestic premises. It also includes establishments
directly connected without intermediate transformers to a
low voltage power supply network that supplies buildings
used for domestic purposes.
Category C2: Power Drive System (PDS) of rated
voltage