Instruction manual - Emotron
Instruction manual - Emotron
Instruction manual - Emotron
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6.1.3Compressors<br />
6.1.4Blowers<br />
Challenge <strong>Emotron</strong> FDU solution Menu<br />
Compressor is damaged when cooling media<br />
enters the compressor screw.<br />
Pressure is higher than needed, causing leaks,<br />
stress on the equipment and excessive air use.<br />
Motor runs at same speed when no air is<br />
compressed. Energy is lost and equipment<br />
stressed.<br />
Process inefficiency and energy wasted due to e.g.<br />
the compressor idling.<br />
Overload situation is quickly detected and safety<br />
stop can be activated to avoid breakdown.<br />
Load Curve Protection function detects deviation.<br />
Warning is sent or safety stop activated.<br />
PID continuously adapts to the level required.<br />
Sleep function activated when none is needed.<br />
Load Curve Protection quickly detects deviation.<br />
Warning is sent or safety stop activated.<br />
411–41A<br />
411–419, 41C1–41C9<br />
320, 380, 342, 354<br />
411–419, 41C1–41C9<br />
Challenge <strong>Emotron</strong> FDU solution Menu<br />
Difficult to compensate for pressure fluctuations.<br />
Wasted energy and risk of production stop.<br />
Motor runs at same speed despite varying<br />
demands. Energy is lost and equipment stressed.<br />
Process inefficiency due to e.g. a broken damper, a<br />
valve not fully opened or a worn belt.<br />
PID function continuously adapts pressure to the<br />
level required.<br />
PID continuously adapts air flow to level required.<br />
Sleep function activated when none is needed.<br />
Load Curve Protection quickly detects deviation.<br />
Warning is sent or safety stop activated.<br />
320, 380<br />
320, 380, 342, 354<br />
411–419, 41C1–41C9<br />
38 Applications CG Drives & Automation, 01-5325-01r1