Nabertherm Controller Manual - Warm-Glass.com
Nabertherm Controller Manual - Warm-Glass.com
Nabertherm Controller Manual - Warm-Glass.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 8 /TD/Einleitung/Allgemeines/<strong>Controller</strong>/Überschrift - Allgemeines @ 0\mod_1168857771977_51.doc @ 6176 @ 2 @ 1<br />
1.2 General<br />
Pos: 9 /TD/Einleitung/Allgemeines/<strong>Controller</strong>/Allgemeines @ 0\mod_1168875225840_51.doc @ 6381 @ @ 1<br />
Pos: 10 /TD/Betrieb_Bedienung/<strong>Controller</strong>/B150/B130/B170/C280/C290/C295/P320/Sicherheit @ 0\mod_1169023764018_51.doc @ 6885 @ 2 @ 1<br />
1.3 Safety<br />
Pos: 11 /=== Seitenumbruch === @ 0\mod_1158819844943_0.doc @ 2983 @ @ 1<br />
8<br />
Before working on electrical systems, switch the power switch to "0" and disconnect the<br />
power cord.<br />
Even with the power switch off, some parts in the furnace may carry voltage.<br />
Work on the electrical system may only be done by a trained person.<br />
The furnace and switching system have been preset by <strong>Nabertherm</strong>. If required, processspecific<br />
optimization must be carried out in order to achieve the best possible control<br />
behavior.<br />
The temperature curve must be modified by the user so that the load, furnace or<br />
surroundings are not damaged. <strong>Nabertherm</strong> GmbH assumes no guarantee for the process.<br />
Caution<br />
Before working on the program-controlled grounding receptacle, the connector (optional<br />
series L, HTC, N, LH), or the connected device, always turn off the furnace and disconnect<br />
the power cord.<br />
Read the operating instructions for the controller carefully to avoid mistakes or<br />
malfunctions in the operation of the controller or the furnace.<br />
The controller has a series of electronic safety systems. If a fault occurs, the furnace<br />
automatically shuts off and a fault message appears in the LCD display.<br />
Note<br />
For more information, please see Chapter "Faults - fault messages"<br />
Warning! General Hazards!<br />
The Operating Instructions must be followed prior to switching on the furnace.