Carnival Castle

Step 28
H152
60 7/8"
361 306
245
H152
H194
Wood Roof Installation
*NOTE: Holes in Roof Frame Top/Bottom Boards (306) are offset. Position board correctly
as shown below.
1. Center Roof Frame Tops (306) on Roof Supports (360) (361) and attach using #8 Hardware
(H152). Roof Frame Tops (306) should over-hang Peak Facias (308) by approximately 2". Roof
Frame Tops (306) should form a peak without gaps between boards (as shown in INSET A).
2. Measure down 60 7/8" from the bottom of the Roof Frame Top (306) on BOTH Roof Supports and
attach Roof Frame Bottom (306) to Roof Supports using #8 Hardware (H152).
3. Position Roof Boards (245) on Roof Supports (360) (361) between Roof Frame Top/Bottom Boards
(306). Center Roof Boards (245) on Roof Supports (360) (361), space evenly, and attach using #8
Hardware (H152).
4. After attaching the first 5-6 Roof Boards (245) on each side of the roof, center and attach Roof
Runner (297) to Roof Boards using #8 Hardware (H194) and to Roof Frame Top/Bottom Boards
(306) using #8 Hardware (H152).
5. Finish attaching Roof Boards (245) to Roof Supports (360) (361) using #8 Hardware (H152) and to
Roof Runner (297) using #8 Hardware (H194).
NO GAP
245
H194
47
H152
H152
360
360
306
306
306
INSET A
297
306
361
361
308