Download now - ASAM

66
Solutions Guide 2011
directory of members & products
import through M2M aquintos model transformation
and supports automotive standards
such as MISRA-C:2004, OSEK, and ASAM
Supported ASAM Standards: ASAM MCD-2
MC (ASAP2), ASAM AE MBFS
XETK/ETK
Product Type/Service: Development Tool
Functionalities: XETKs/ETKs comprise parallel
or serial ECU interfaces for calibrating, flashing,
measuring, rapid prototyping (bypass), and
debugging XETKs/ETKs are designed to support
function development for, and calibration
of automotive ECUs in harsh environments
(operating temperature ranges from -40 °C
to +110 °C) XETKs/ETKs provide excellent
power-on (cold start) features, proven reliability,
high performance, low latency, and high
data throughput
Supported ASAM Standards: ASAM MCD-2
MC (ASAP2)
InCA
Product Type/Service: Development Tool
Functionalities: INCA is a universal product
family for online and offline calibration of ECU
function parameters, controlled via a graphical
user interface or remote access INCA performs
the measurement of signals obtained
from ECUs and from the vehicle environment,
and incorporates powerful tools for managing
ECU projects and parameters, analyzing measured
and reading diagnostic data, as well as
flash programming
Supported ASAM Standards: ASAM AE CDF,
ASAM MCD-1 XCP, ASAM MCD-1 CCP,
ASAM MCD-2 MC (ASAP2), ASAM MCD-2 D
(ODX), ASAM MCD-2 NET (FIBEX), ASAM
MCD-3
InTECRIO
Product Type/Service:
Function Development Tool
Functionalities: INTECRIO supports the development
of embedded control software
through integrated functions modeled in the
engineer‘s familiar ASCET-MD, MATLAB®/
Simulink®, AUTOSAR, and/or C code development
environment INTECRIO provides a
common environment for prototyping control
functions on the PC or in the real world by
means of rapid prototyping hardware
Supported ASAM Standards: ASAM MCD-2
MC (ASAP2), ASAM MCD-2 NET (FIBEX)
ODX-LInK
Product Type/Service: Development Tool
Functionalities: ODX-LINK is an add-on
product for the well-known INCA measurement
and calibration tool ODX-LINK provides
INCA users with diagnostic capabilities,
enabling them to send and receive diagnostic
messages, read and clear DTCs, and set up automated
diagnostic procedures ODX-LINK is
fully integrated with the INCA user interface
With the new OBD scan tool graphical user
interface, even a novice is able to access diagnostic
information
Supported ASAM Standards: ASAM MCD-2 D
(ODX) V2 0, ASAM MCD-3 V2 0
ODX-fLASh
Product Type/Service: Development Tool
Functionalities: ODX-FLASH is an add-on product
for the well-known INCA measurement and
calibration tool ODX-FLASH enables users
to reprogram ECUs with an ODX-based flash
project description ODX-FLASH is fully integrated
with the INCA user interface
Supported ASAM Standards: ASAM MCD-2 D
(ODX) V2 0, ASAM MCD-3 V2 0
LABCAR-OPERATOR
Product Type/Service:
Test and Experimentation Tool
Functionalities: Configures and operates Hardware-in-the-Loop
testing systems for the validation
and verification of automotive embedded
software LABCAR-OPERATOR provides
virtual instrumentation, data and signal flow
management, signal generation, and real-time
data logging
Supported Standards: ASAM MCD-2 MC
(ASAP2)
LABCAR-AuTOMATIOn
Product Type/Service: Test Automation Tool
Functionalities: Develops, manages, and executes
abstract and test bench independent automated
tests for embedded software To ensure highquality
automated tests, the tool supports different
activities and roles in the testing process
Supported ASAM Standards: ASAM MCD-2
MC (ASAP2), ASAM MCD-2 D (ODX)