SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Electric horse tooth rasp<br />
Setup and function<br />
4.2.3 Fitting<br />
Overview<br />
Fig. 6<br />
1 Two countersunk screws (M5x16)<br />
2 Three countersunk slotted screws (1x M3x12, 2x M3x40)<br />
3 Cover (with nameplate)<br />
4 Housing<br />
5 Fillister head screw (M5x16)<br />
Brief description The fitting is the interface between the power unit and the rasp<br />
attachment. A square bolt is used to insert the power unit into the<br />
receiver of the housing and secured by with fillister head screw<br />
(5). Loosening the fillister head screw makes it possible to rotate<br />
the fitting by 180° and align the rasp attachment. The belt tension<br />
is retained by two countersunk screws (1).<br />
4.2.4 Residual current circuit breaker<br />
Overview<br />
Fig. 7<br />
1 2 3 4 5<br />
1 Control lamp<br />
2 RESET button<br />
3 TEST button<br />
4 Power plug<br />
5 Nameplate residual current circuit breaker<br />
6 Cord<br />
Brief description The electronic residual current circuit breaker will cut off the<br />
current circuit from the rest of the mains if the current exceeds the<br />
amperage difference of 30 mA.<br />
22 2010-03-17
Change language