SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG

More documents

Recommendations

Info

Electric horse tooth rasp Use 6.7 Working on the machine 6.7.1 Aligning the rasp attachment Fig. 28 Fig. 29 Fig. 30 Fig. 31 2 2 1 1 The rasp attachment can be rotated by 180° to ensure the grip can be held ergonomically at any stage of use. 1. Use the Torx 25 (1) screwdriver to loosen the M5x16 (2) fillister head screw on the fitting. Do not unscrew it. 2. Rotate the fitting and align the rasp attachment as needed. 3. Make sure the fitting is flush with the power unit. If necessary, slide the fitting all the way against the power unit. 4. Tighten the M5x16 (2) fillister head screw using a Torx 25 screwdriver (1). 38 2010-03-17
6.7.2 Changing the rasping disk Fig. 32 Fig. 33 Fig. 34 1. Place the fixing plate (1) onto the rasping disk. Electric horse tooth rasp 2010-03-17 39 Use 2. Make sure that the fixing pins (2) of the fixing plate are inside the fixing holes (3) on the rasping disk. If necessary, turn the rasping disk slightly until the fixing pins lock into place. 3. Use one finger to press and hold the fixing plate on the rasping disk. 4. Unscrew and remove the M5x8 countersunk screw using a Torx 25 screwdriver (1). 5. Remove the rasping disk from the rasping head. 6. Align the driving pins (1) of the rasping head with the bores (2) on the rasping disk. 7. Place the rasping disk onto the rasping head. 8. Make sure that both driving pins (1) are inside the bores (2) of the rasping disk. If necessary, turn the rasping disk slightly until the fixing pins lock into place.
Page 1 and 2: 2010-03-17 Dok-ID: EV-0708-F3 Opera
Page 3 and 4: Electric horse tooth rasp Contents
Page 5 and 6: Electric horse tooth rasp Contents
Page 7 and 8: 1.2 Explanation of symbols Electric
Page 9 and 10: 1.5 Spare parts 1.6 Customer servic
Page 11 and 12: 2.2 Personnel requirements Qualific
Page 13 and 14: 2.4 Personal protective equipment E
Page 15 and 16: Rotating rasping disk Hot surfaces
Page 17 and 18: 3 Technical Specifications 3.1 Gene
Page 19 and 20: 3.4 Nameplate Fig. 1 Fig. 2 1 Elect
Page 21 and 22: 4.2 Description of components 4.2.1
Page 23 and 24: 5 Transport, packaging, and storage
Page 25 and 26: 6 Use 6.1 Safety Electric horse too
Page 27 and 28: Fig. 12 Fig. 13 Electric horse toot
Page 29 and 30: 6.4 Operating the machine 6.4.1 Swi
Page 31 and 32: Dental treatment 6.5 Dental treatme
Page 33 and 34: 6.5.2.1 Lower jaw 6.5.2.2 Upper jaw
Page 35 and 36: 6.5.2.5 Incisors and canines 6.5.2.
Page 37: 6.6.2 Cleaning as needed Fig. 26 Fi
Page 41 and 42: 7 Troubleshooting 7.1 Safety Electr
Page 43 and 44: 7.3 Troubleshooting steps 7.3.1 Adj
Page 45 and 46: 7.4 Use after fault has been correc
Page 47 and 48: 9 Spare parts 9.1 Spare part orders
Page 49 and 50: Item Item number Description 25 109
Page 51 and 52: 11 Index B Belt tension, adjust....

SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?