SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
SWISSFLOAT Operating manual E KRESS - Eisenhut-Vet AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Electric horse tooth rasp<br />
Troubleshooting<br />
7.3.2 Changing the sealing ring<br />
Fig. 41<br />
Fig. 42<br />
Fig. 43<br />
Fig. 44<br />
If you change the sealing yourself, you do so at your own risk as<br />
replacing the sealing ring may damage the rasp attachment.<br />
Consult the manufacturer if necessary (for the manufacturer's<br />
address, see page 2).<br />
1. Use a soft plastic brush to thoroughly clean the rasping head.<br />
2. Let the rasping head dry.<br />
3. Put the screwdriver to the outer diameter of the sealing ring.<br />
4. Use the screwdriver to lift the sealing ring out of its holder.<br />
5. Apply silicon spray to the new sealing ring and the rasping<br />
head.<br />
6. Use both thumbs to press the sealing ring into the holder of<br />
the rasping head.<br />
7. Make sure the sealing ring is placed flush in the holder.<br />
44 2010-03-17