HiTec Zang GmbH -- Main Catalogue 2009/10

22
Automatic Laboratory Reactor Systems
Automated Laboratory Clarification Unit
The Laboratory Clarification Unit LabKit-sp
enables the systematic investigation of the biological
degradability of various liquid waste content
substances. It consequently provides the basis
information for the establishment of strategies for
liquid waste purification. The unit enables the
reproduction of clarification processes of large plants
on a laboratory scale. It is also possible to conduct
tests regarding the determination of the biological
degradability according to OECD301A.
The Unit comprises four levels:
1.) Neutralisation with automated ph-Control, with
ViscoPakt Stirrer, LabDos- Pump for the Feed,
Overflow to the Denitrification.
2.) Denitrification with O2-Measurement, pH-
Measurement, ViscoPakt Stirrer, Interior
Temperature Control (through electrical Heating with
Heating Jacket), Overflow to the Nitrification.
3.) Nitrification with O2-Control (through regulated
Air Supply via a Base Frit), pH-Measurement,
ViscoPakt-Stirrer, Interior Temperature Control
(through electrical Heating with Heating Jacket),
Foam Identification with automated Defoamer
Addition, LabDos Pump for the transporting back the
sludge into the Denitrification, Outlet into the Settling
Tank.
4.) Settling Tank with Overflow, Discharge Valve,
LabDos Pump for the transporting back the sludge
into the Denitrification.
The Laboratory Clarification Unit is fully automated
with a LabBox System and LabVision. It can
naturally also be run manually.
pH-Value, Temperature and Oxygen Concentration
and further Measurement Variables are collected.,
stored in the data base and graphically presented.
The automation enables unattended operation and
reproducibility at any given time.
The permanent data recording leads to a consistent
documentation of all process sequences.
Neutralisation, Denitrification, Activation and Final Clarification
Pilot Clarification Units deviant from this standard
laboratory clarification unit, according to your
specifications, are also offered by HiTec Zang.
Order Code Description
VL-LABKIT-SP Automated Laboratory Clarification Unit with LabBox PI and ABK1
VL-LABKIT-SP-PHCON Automatic pH-Control
VL-LABKIT-SP-FOCON Automatic Defoaming Control
The plant is supplied in turnkey condition together with a LabBox2 Automation System and a ABK1
Workstation with 20“ Monitor.
30 Years of Excellence in Lab Scale Technology · Over 1.000 Products around the Laboratory Reactor