Demandes / Applications - Industrie Canada

Vol. 59, No. 3011 TRADE-MARKS JOURNAL DES MARQUES DE COMMERCE
viande, du poisson, de la volaille et des salades; enrobages et
assaisonnements pour aliments, nommément enrobages
assaisonnés pour viande, poisson, volaille et salades; épices
sèches et préparées; huiles non essentielles, nommément
aromatisants alimentaires; assaisonnements à usage général.
Emploi projeté au CANADA en liaison avec les marchandises.
1,499,117. 2010/10/08. Hyundai Auto Canada Corp., 75
Frontenac Drive, Markham, ONTARIO L3R 6H2 Representative
for Service/Représentant pour Signification: MCMILLAN LLP,
BROOKFIELD PLACE, SUITE 4400, BAY WELLINGTON
TOWER, 181 BAY STREET, TORONTO, ONTARIO, M5J2T3
NEW THINKING. NEW POSSIBILITIES.
WARES: Automobiles and parts therefor, and accessories,
namely, door stripes, body trim stripes, wheel trim rings, fog light
kits, sport grills, steering wheel covers, sunroofs, wheel covers,
spoiler and striping kits, sunshield wings, wiper wings, rear deck
spoilers, front air dams, sport racks, spark plug wire kits, plastic
engine covers, exhaust (mufflers), am/fm stereo-cassette
players, am/fm stereo radios, am/fm CD players, CD changers,
speaker kits, speakers, carpeted floor mats, sisal floor mat sets,
rubber floor mat sets, key protector pads, key chains, t-shirts,
jackets, golf shirts and baseball caps. SERVICES: Repair and
maintenance of motor vehicles, financial services, namely,
lending money for the purchase of motor vehicles and insurance
services, all relating to motor vehicles; extended warranty
services for motor vehicles; leasing services related to motor
vehicles; operation of an emergency road and towing service for
motor vehicles. Proposed Use in CANADA on wares and on
services.
MARCHANDISES: Automobiles ainsi que pièces connexes et
accessoires, nommément bandes de portières, lignes
décoratives de carrosserie, cercles enjoliveurs décoratifs,
ensembles de phares antibrouillard, calandres sport, couvrevolants,
toits ouvrants, enjoliveurs de roues, nécessaires de
becquet et de marquage, déflecteurs pare-soleil, déflecteurs
pour essuie-glaces, ailerons arrière, jupes avant, supports pour
articles de sport, ensembles de câbles pour bougies d'allumage,
couvre-moteurs en plastique, silencieux, radiocassettes stéréo
AM-FM, radios stéréo AM-FM, lecteurs de CD AM-FM,
changeurs de CD, ensembles de haut-parleurs, haut-parleurs,
tapis de voiture, ensembles de tapis en sisal, ensembles de tapis
de caoutchouc, protecteurs de clavette, chaînes porte-clés, teeshirts,
vestes, polos et casquettes de baseball. SERVICES:
Réparation et entretien de véhicules automobiles, services
financiers, nommément prêts pour l'achat de véhicules
automobiles et services d'assurance, ayant tous trait aux
véhicules automobiles; services de garanties prolongées pour
véhicules automobiles; services de location ayant trait aux
véhicules automobiles; exploitation de services routiers
d'urgence et de remorquage pour véhicules automobiles.
Emploi projeté au CANADA en liaison avec les marchandises et
en liaison avec les services.
1,499,486. 2010/10/13. KALTENBACH GMBH + CO. KG,
Blasiring 4, 79539 Lörrach, GERMANY Representative for
Service/Représentant pour Signification:
FETHERSTONHAUGH & CO., SUITE 900, 55 METCALFE
STREET, P.O. BOX 2999, STATION D, OTTAWA, ONTARIO,
K1P5Y6
KALTENBACH
WARES: (1) Industrial lubricants for cooling; transporting
equipment, namely roller conveyors and cross conveyor for the
supply and carrying-off of work pieces, material webs, profiles
and sheets to processing machines and length stops, robot
handlings (machines) for the supply and carrying-off of work
pieces, material webs, profiles and plates; mechanical tools,
namely circular saw blades, endless saw blades, shearing
blades, hand-held drills for machines, thread cutters, punching
dies, numbering tools for use in marketing numbers,
oxyacetylene cutting tables and plasma torches, welding torches,
dispensing apparatus for dispensing industrial lubricants for
cooling; machines for the metal machining and finishing, namely
circular cold saw machines, endless saw blade machines, drilling
machines for the machining of structural steel profiles, blow-torch
cutting-off robots for the machining of structural steel profiles,
drilling/blow-torch cutting-off machines for the machining of steel
sheets, punching machines for the machining of structural steel
profiles, in particular flat steel, corner steels and U-bent profiles,
injection installations for the machining of structural steel profiles
and sheets, preservation lines, namely, shot blasting and
painting machines for the machining of structural steel profiles
and sheets, marking and numbering machines, sharpening
machines for saw blades, endless saw blades and drills as well
as single parts, wear parts and replacement parts for the
aforesaid goods; length measuring devices, namely, for
positioning the material bar to the position where the process of
cutting, drilling, and punching will take place, computer software
(stored or downloadable) for the operation of machines, for the
management of order data, cutting data, material data and for
the optimization of production sequences and production steps,
for the communication with superior control systems such as
CAD systems or ERP systems for the visualization, supervision
and control and operational processes. (2) Industrial lubricants
for cooling; machines for the metal machining and finishing,
namely circular cold saw machines, endless saw blade
machines, drilling machines for the machining of structural steel
profiles, blow-torch cutting-off robots for the machining of
structural steel profiles, drilling/blow-torch cutting-off machines
for the machining of steel sheets, punching machines for the
machining of structural steel profiles, in particular flat steel,
corner steels and U-bent profiles, injection installations for the
machining of structural steel profiles and sheets, preservation
lines, namely, shot blasting and painting machines for the
machining of structural steel profiles and sheets, marking and
numbering machines, sharpening machines for saw blades,
endless saw blades and drills as well as single parts, wear parts
and replacement parts for the aforesaid goods; length measuring
devices, namely, for positioning the material bar to the position
where the process of cutting, drilling, and punching will take
place, computer software (stored or downloadable) for the
operation of machines, for the management of order data, cutting
data, material data and for the optimization of production
sequences and production steps, for the communication with
11 juillet 2012 82 July 11, 2012