You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
03<br />
Connecting your equipment<br />
Connecting to the front panel<br />
video terminal<br />
Front video connections are accessed via the<br />
front panel using the INPUT SELECTOR or<br />
VIDEO button on the remote control. There are<br />
standard audio/video jacks. Hook them up the<br />
same way you made the rear panel<br />
connections.<br />
•Push down on the PUSH OPEN tab to<br />
access the front video connections.<br />
USB<br />
CONTROL<br />
iPod<br />
iPhone<br />
ON / OFF<br />
VIDEO<br />
VIDEO INPUT<br />
L<br />
AUDIO R<br />
VIDEO L R<br />
AUDIO/VIDEO OUTPUT<br />
MCACC<br />
SETUP MIC<br />
MASTER<br />
VOLUME<br />
This receiver<br />
Video camera<br />
(etc.)<br />
Plugging in the receiver<br />
Only plug in after you have connected all your<br />
components to this receiver, including the<br />
speakers.<br />
• Plug the AC power cord into a convenient<br />
AC power outlet.<br />
CAUTION<br />
• Handle the power cord by the plug part. Do<br />
not pull out the plug by tugging the cord,<br />
and never touch the power cord when your<br />
hands are wet, as this could cause a short<br />
circuit or electric shock. Do not place the<br />
unit, a piece of furniture, or other object on<br />
the power cord or pinch the cord in any<br />
other way. Never make a knot in the cord or<br />
tie it with other cables. The power cords<br />
should be routed so that they are not likely<br />
to be stepped on. A damaged power cord<br />
can cause a fire or give you an electric<br />
shock. Check the power cord once in a<br />
while. If you find it damaged, ask your<br />
nearest <strong>Pioneer</strong> authorized independent<br />
service company for a replacement.<br />
• The receiver should be disconnected by<br />
removing the mains plug from the wall<br />
socket when not in regular use, e.g., when<br />
on vacation.<br />
28<br />
En