AIR CONDITIONING - Toyota-tech.eu
AIR CONDITIONING - Toyota-tech.eu
AIR CONDITIONING - Toyota-tech.eu
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1<br />
COMPRESSOR<br />
(2) COMPRESSOR<br />
(a) Install the compressor from under side to the<br />
engine block using four bolts.<br />
CAUTION 3<br />
4 BOLT No.1<br />
[1]<br />
[3]<br />
6<br />
[2]<br />
[A]<br />
[4]<br />
2<br />
BOLT W/WASHER<br />
(M8 x 81)<br />
7<br />
Push downward<br />
until bolt No.2 to<br />
be tightened.<br />
Tightening order : [1]>[2]>[3]>[4]<br />
CAUTION<br />
When bolt No.2 tight after bolt No.1 tight with loose,<br />
push [A] portion downward until bolt No.2 to be<br />
tightened for compressor install horizon tally.<br />
Without this assembly process, compressor will be<br />
tightened with tilted state. Then belt alignment will<br />
be out of spec and it may makes belt noise after a<br />
couple of years.<br />
Tightening Torque<br />
8<br />
UP<br />
10<br />
HORIZON<br />
24.5 N•m (250 kgf•cm, 18.0 ft•lbf)<br />
9<br />
DOWN<br />
1 COMPRESSOR<br />
6<br />
5<br />
BOLT No.2<br />
B000497<br />
- 41 -<br />
00500345
Change language