©2010 ESQ by Movado Printed in China 4/10 • SKU 570049520 ...

minute-counter hand E will jump ahead oneminute. Tenths-of-a-second hand G does notmove when the chronograph is running.Pressing button A a second time will stop thechronograph and move hand G to the relevanttenth-of-a-second mark. Pressing button B willreset hands G, E and C to zero. Adjusting thetime does not stop the chronograph, but itdoes block buttons A and B for as long as thecrown is pulled out.IMPORTANT: Crown must be in position 1 andhands must be at zero before chronograph isstarted. Press button B to reset hands to zero.Do not push button A or B while crown ispulled to position 2 or 3. If button A or B isaccidentally activated while crown is not flushagainst case, one or more of the chronographhands will become desynchronized. Shouldthis occur, see directions for synchronizinghands at end of following instructions.Simple chronograph functions:To measure the duration of a single, non-stopevent:1. Press button A to start chronograph.2. Press button A a second time to stopchronograph, and read the 3 chronographhands to determine elapsed time, for example:14 minutes, 37 seconds, 5/10 of a second.3. Press button B to reset chronograph tozero.Accumulated time functions:To measure the combined time of a series ofshorter events, for example the actual playingtime of a football game, where play isrepeatedly interrupted:1. Press button A to start chronograph.2. Press button A a second time to stopchronograph.3. Press button A again to resumemeasurement.26 27