Samsung GX-10 (ER-GX10ZBBA/DK ) - Manuel de l'utilisateur 12.31 MB, pdf, Anglais

Attaching the Lens
Only D-XENON, D-XENOGON lenses can be used with this camera.
Some functions are restricted when lenses are not set to Aperture A (Auto). Also see “Notes on
[Using Aperture Ring]”. Other lenses and accessories will not be available with factory default
settings. To allow shutter release, set [Use Aperture Ring] in [CUSTOM2 MENU] menu.
INFORMATION
Turn the camera off before attaching or removing the lens to prevent unexpected lens problems.
1. Check that the camera is off.
2. Remove the body mount cover () and lens mount cover ().
Be sure to put the lens down with the lens mount side facing
upward to avoid damage.
3. Align the red dots on the camera and the lens, and secure by
turning the lens clockwise until it clicks.
After attaching, check that the lens is secure. Also check that
the red dots of the lens are on top and the attached portion
does not move sideways.
46