You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>termosanitaria</strong> <strong>by</strong> <strong>Luxor</strong><br />
Componenti<br />
Sistema di riscaldamento misto: GP 1190<br />
Mixed heating system: GP 1190<br />
Комбинированная система отопления: GP 1190<br />
Il sistema per il riscaldamento a punto fisso ha il vantaggio di<br />
essere particolarmente compatto e di sfruttare tutti i<br />
componenti di serie dei collettori <strong>Luxor</strong> già in commercio e<br />
che già conoscete, con l’aggiunta di 2 soli articoli specifici:<br />
•art. GP 1190;<br />
•art. TT 2351.<br />
Le valvole in ingresso o uscita sono realizzate per il<br />
collegamento della pompa ai collettori e sono dotate di:<br />
•filetti da G1” girevoli con tenuta morbida, o-ring, come tutta<br />
la componentistica per i collettori;<br />
•valvole a sfera per l’intercettazione della pompa;<br />
•collegamento alla pompa con dado girevole da G 1”1/2<br />
•alloggiamenti per la sonda di regolazione della testa<br />
termostatica e predisposizione per l’alloggiamento del<br />
sensore del termostato di sicurezza;<br />
•termometro per il controllo visivo della temperatura<br />
impostata;<br />
•attacchi G 1/2 femmina per altri eventuali strumenti.<br />
L’impiego delle staffe articolo SC 496 con interasse da 200 mm,<br />
permette di installare pompe con interasse da 130 mm.<br />
Nel caso siano utilizzate teste termoelettriche per<br />
l’intercettazione dei circuiti è consigliabile installare una<br />
valvola di <strong>by</strong>pass, in modo da evitare fenomeni di rumore e<br />
usura della pompa di circolazione.<br />
Components<br />
5<br />
GP 1190<br />
The fixed point heating system has the advantage to be<br />
particularly compact and to be used with all the series<br />
components of <strong>Luxor</strong>’s manifolds available on the market,<br />
which are familiar to you, with the addition of 2 specific items<br />
which are:<br />
•Item GP 1190;<br />
•Item TT 2351.<br />
The inlet or the outlet valves are made to connect the pump<br />
to the manifold and are equipped with:<br />
•threads 1” swivelling with o-ring, soft tightening, applied to<br />
all manifolds components;<br />
•ball valves for pump interception;<br />
•pump connection with swivelling nut G 1”1/2;<br />
•seat for regulation feeler of the thermostatic head and<br />
prearrangement for the security thermostat sensor;<br />
•thermometer for the visual control of the pre-set<br />
temperature;<br />
•connection G 1/2 F for connection to other instruments.<br />
In case of use of the thermostatic heads for the circuits<br />
interception it is advisable to install a <strong>by</strong>pass valve, so to<br />
avoid noise and ware episodes on the circulation pump.<br />
161