ME 545, ME 545 C, ME 545 V - Castorama

Description of symbols
(1)
Standard equipment
Preparing the appliance
for operation
Warning - Dangers caused
by electrical current
- The cord must be kept
away from the blade when
mowing.
- Only use extension cables
that are insulated against
moisture for outdoor use
(see section: Initial
operation).
- Although the
drive motor is
splashproof,
do not use the lawn mower
when it is raining or in wet
environments.
- Do not leave the appliance
unprotected in the rain.
- Detach connection cords at
the plug and socket and
not by pulling on the
connection cord.
- When operating the
appliance, the socket must
be fitted with a residual
current operated device
(max. trigger current:
30 mA), or such a device
must be inserted when
connecting the appliance.
Your electrician can
provide further information.
Caution!
Read the instruction
manual before initial
use.
Risk of injury!
Keep other persons
away from the
danger area.
Risk of injury!
Beware of the sharp
mowing blade. The
mowing blade runs on
for several seconds
after switching off
(motor / blade brake).
Before performing
any work on the
cutting tool, before
carrying out
maintenance and
cleaning work, before
checking whether the
connection cord is
entwined or
damaged, or before
leaving the mower
unattended, switch off
the motor and
disconnect the plug.
Danger of electric
shock!
Keep the connection
cord away from the
cutting tool.
Item Designation
2
Qty.
1 Basic unit 1
2 Cable anti-kink
protection
ME 545, ME 545 C 1
ME 545 V 2
3 Flat head bolt 2
4 Rotary handle 2
5 Cable guide 1
(ME 545 C, ME 545 V)
6 Upper part of grass
catcher bag 1
7 Lower part of grass
catcher bag 1
8 Pin 2
9 Cable clip 2
(ME 545)
10 Washer 2
(ME 545)
• Instruction manual 1
NOTE
Place the appliance on level
and firm ground to perform
this work.
Assembling the
handlebar 3
Assemble the handlebar:
Attach
A= handlebar to both parts
of lower handlebar.
Insert
3= flat head bolts through
bore from the inside to
the outside and tighten
securely with
4= rotary knobs.
NOTE
The machined grooves in the
threads prevent the rotary
handles from becoming
completely detached from
the bolts (safeguard against
loss).
6 0478 121 9909 E - EN