13.01.2014 Views

ME 545, ME 545 C, ME 545 V - Castorama

ME 545, ME 545 C, ME 545 V - Castorama

ME 545, ME 545 C, ME 545 V - Castorama

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Installing the mowing<br />

blade<br />

CAUTION<br />

Risk of injury!<br />

Always wear<br />

gloves.<br />

21<br />

Install the<br />

17= mowing blade with the<br />

curved wings pointing<br />

upwards.<br />

For installation, use a<br />

16= wooden block (approx.<br />

60 x 60 mm) to<br />

counterhold the mowing<br />

blade.<br />

Tighten the<br />

18= blade fastening screw to<br />

a torque of 10 - 15 Nm.<br />

Risk of injury!<br />

Observe the specified<br />

torque of 10 - 15 Nm when<br />

tightening the blade<br />

fastening screws, as the<br />

secure attachment of the<br />

cutting tool depends on this.<br />

Additionally secure the<br />

blade fastening screw (18)<br />

with Loctite 243.<br />

Adjusting the wheel<br />

drive cable<br />

22<br />

Maintenance interval:<br />

As required (wheel drive<br />

does not engage when the<br />

wheel drive lever is<br />

actuated)<br />

The tension of the cable is<br />

adjusted correctly at the<br />

factory. However, the cable<br />

may have to be adjusted<br />

again following an extended<br />

period of use.<br />

The adjustment is made<br />

via an<br />

21= adjustment screw located<br />

on the left of the upper<br />

handlebar.<br />

Correct adjustment:<br />

Actuate the drive lever while<br />

pulling the lawn mower<br />

backwards.<br />

The driving wheels must lock<br />

after approx. one third of the<br />

lever travel.<br />

The cable tension is<br />

increased by turning the<br />

21= adjustment screw in the<br />

“+” direction, turning it in<br />

the “-” direction reduces<br />

the tension.<br />

CAUTION<br />

Risk of injury!<br />

If, when pulling back, the<br />

driving wheels are locked<br />

when the drive lever is not<br />

actuated, the cable is<br />

adjusted incorrectly and the<br />

mower drive is permanently<br />

activated.<br />

As a result, the mower may<br />

start to move unintentionally<br />

immediately when started<br />

and this may result in injury<br />

or damage to the appliance.<br />

The adjustment must be<br />

repeated (if necessary,<br />

contact a specialist dealer;<br />

VIKING recommends VIKING<br />

specialist dealers).<br />

Storage<br />

(winter break)<br />

The storage room should be<br />

dry and free of dust. The<br />

mower should also be stored<br />

out of reach of children.<br />

Any appliance faults must be<br />

remedied prior to storage in<br />

order to maintain a safe<br />

operating condition.<br />

Note the following points<br />

when storing the mower for<br />

long periods (winter break):<br />

- Carefully clean all external<br />

parts of the appliance.<br />

- Thoroughly<br />

lubricate/grease all moving<br />

parts.<br />

14 0478 121 9909 E - EN

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!