TERMOCAMINO 650 - 800
TERMOCAMINO 650 - 800
TERMOCAMINO 650 - 800
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Termocamino <strong>650</strong> - <strong>800</strong><br />
La Nordica S.p.A. declines any responsibility for damages to things and/or people caused by the<br />
installation. Furthermore it is not responsible of any modified product without authorisation as well as for<br />
the use of non-original spare parts.<br />
Your regular local chimney sweep must be informed about the installation of the appliance so that he can<br />
check the correct connection to the chimney.<br />
Before installing the appliance, carry out the following checks:<br />
• Make sure that the floor can support the weight of the appliance, and if it is made of flammable<br />
material, provide suitable insulation.<br />
• Make sure that there is adequate ventilation<br />
(by means of an air intake, see chapter 7) in<br />
the room where the appliance is to be<br />
installed.<br />
• Do not install the appliance in rooms<br />
containing collective ventilation ducts, hoods<br />
with or without extractor, type B gas<br />
appliances, heat pumps, or other appliances<br />
that, operating at the same time, can put the<br />
room in depression (ref. UNI 10683/98<br />
standard)<br />
• Make sure that the flue and the pipes to which<br />
the appliance will be connected are suitable<br />
for its operation.<br />
• Always leave minimum 6 cm of air gap on<br />
sides and rear between the thermo-fireplace<br />
and the walls. (see Picture 3 - Picture 13 -<br />
Picture 14)<br />
• Using the adjustable feet and a level, make<br />
sure that the appliance is perfectly level to<br />
ensure the correct movement of the door.<br />
Picture 3<br />
We recommend having your local chimney sweep<br />
check both the chimney connection and that there<br />
is sufficient air flow for combustion in the place of<br />
installation.<br />
See also chapter 8 - INSTALLATION AND SAFETY DEVICES<br />
min. 5cm 6cm<br />
4. FIRE PREVENTION<br />
When installing the appliance, the following safety measures must be respected:<br />
a) In front of the thermo-fireplace, there must not be any object or construction material that is<br />
flammable or heat sensitive situated less than 80 cm from the appliance;<br />
b) If the appliance is installed on a floor that is not completely refractory, a fireproof base, for example<br />
a steel platform, must be provided (dimensions according to regional regulations. (see Picture 4)<br />
The ash drawer must always be inserted when the thermo-fireplace is in operation.<br />
The solid combustion residues (ashes) must be collected in a metal container that is hermetically sealed<br />
and fire resistant. The appliance must never be lit in the presence of gaseous emissions or vapours (for<br />
example: glue for linoleum, petrol, etc,). Do not place flammable materials in the vicinity of the appliance.<br />
During the combustion, thermal air is emitted by involving the heating of areas, door and glass hearth, of<br />
the door handles or controls, of the smokes pipe and, in case, of the front part of appliance. Avoid to touch<br />
those parts without a protective clothing or without accessory tools (gloves resistant to heat, control<br />
devices).<br />
Instruct the children to achieve those dangers and keep them out from hearth during its operation.<br />
touched.<br />
Instruction Manual – Rev.07 – EN 23