TERMOCAMINO 650 - 800

Termocamino 650 - 800
IMPORTANT:
With the use of metal pipes, it is indispensable that they be insulated with a suitable material
(coverings in insulating fibre resistant up to 600°C) to prevent deterioration of the masonry or of
the counterplate.
It is indispensable that the space between the upper part, the sides of the appliance, and the incombustible
material deflector on the hood be constantly ventilated.
For this reason, there must be an air intake from below
(cool air inlet) and an outlet above (warm air outlet).
The spaces for air circulation indicated in Picture 13 are
the minimum requirements:
Top:
Base:
minimum opening 1000 cm2
minimum opening 750 cm2
1000 cm
2
This will provide:
• greater safety
• an increase of heat produced by the circulation of
air around the appliance.
Attention: We recommend making the counterplate in fireretardant
plasterboard with self-supporting metal frame, so
that its weight does not bear on the aesthetic covering
(marble).
The heat breather grille (Picture 14 pos.6) is installed on
the upper part of the hood at about 20 cm from the ceiling.
It must always be installed, as its function is to allow the
heat accumulated inside the hood (overpressure) to come
into the room.
Picture 13
750 cm
2
min. 65 cm rear and lateral
7. EXTERNAL AIR INTAKE IN THE INSTALLATION AREA DURING
COMBUSTION
To ensure efficient operation of the appliance, it is essential that the place of installation has sufficient air
intake for combustion and for re-oxygenation of the room itself. This means that, by way of dedicated
openings communicating with the outside, combustion air must be able to circulate even when the doors
and windows are closed.
(1) Insulating material
(1) Isolante
(2) Seal
(2) Sigillare
(3) Insulating (3) Rivestimento coating isolante with external provvisto
aluminum di foglio sheet di alluminio esterno
(4) Door Sportello for per cleaning pulizia
(5) (5) External Presa aria air esterna intake
(6) Heat drain grating
(6) Griglia sfiato calore
(7) Controcappa ignifuga
(7) Fire-retardant counter-hood
(8) Inclinazione Maximum massima inclination 45° 45°
(9) Schermare le parti in legno
con materiale isolante
(9) Shield wooden parts with
(10) Min. (10) distance Distanze between posteriori e Coating laterali
and insert min min 6 cm 6 cm
Picture 14
28 Instruction Manual – Rev.07 – EN