Low-way plug-in connections - MECS

122 |High-way plug-in connectionsHigh-way plug-in connections35-way plug-in connectionGeneral informationIllustrationTechnical descriptionThe 35-way plug-in connection is used for the connection of control units.Various grip-molding designs permit application-specific versions. Sealingby way of an optional rubber grommet at the cable outlet can be dispensedwith for less exacting sealing requirements. To make the connection, thewiring-harness connector is swivelled in and locked with a steel lever.FeaturesE Sealed plug-in connectionE Secondary lockE Engine-compartment installationE Wide range of versions for different installation conditionsTechnical featuresE Vibration resistance: 3 gE Temperature range: -40° C…+85° CE Degree of sealing: IP 30, 54KE Connection cross-sections: 0.5…2.5 mm 2E Suitable contacts: 2.8 mm flat spring contactsE Contact spacing/posts: 5 mm/2.8 mmAll the currently applicable quotation drawings and technical customer documentation for the 35-way plug-in connection product category can befound in the internet under www.bosch-connectors.com.35-way wiring-harness connectorIllustrationProduct informationProduct codeVHP-35PDesignation35-way wiring-harness connectorPart number 0 281 002 999Quotation drawing (component) D 281 010 201Technical dataNo. of poles 35Type of seal (plug)By an optional rubber grommet at cableoutletType of seal (cable)By an optional rubber grommet at cableoutletType of locking (plug) With steel leverVibration resistance3 gTemperature range, min./max. -40 / 85 °CContact spacing5 mmRow spacing2.80 mmApplicationsBodywork attachmentDegree of protectionIP30, IP54KBosch Automotive Aftermarket 2008 | 2009