Low-way plug-in connections - MECS

154 |High-way plug-in connectionsHigh-way plug-in connections55-way plug-in connectionGeneral informationIllustrationTechnical descriptionThe 55-way plug-in connection is used for the connection of Motroniccontrol units.Two grip-molding designs permit application-specific versions. Sealing byway of an optional rubber grommet at the cable outlet can be dispensedwith for less-exacting sealing requirements. To make the connection, thewiring-harness connector is swivelled in and locked with a steel lever.FeaturesE Sealed plug-in connectionE Secondary locking possibleE Engine-compartment installationE Wide range of versions for different installation conditionsTechnical featuresE Vibration resistance: 2.8 gE Temperature range: -40...+85° CE Degree of protection: IP 30, IP 54KE Connection cross-sections: 0.35...2.5 mm 2E Suitable contacts: 2.8 mm flat spring contactE Contact spacing/posts: 5 mm/2.8 mmAll currently applicable quotation drawings and technical customer documentation for the 55-way plug-in connection product category can be foundin the internet under www.bosch-connectors.com.55-way wiring-harness connectorIllustrationProduct informationProduct codeVHP-55PDesignation55-way wiring-harness connectorPart number 0 928 400 205Quotation drawing (assembly) A 928 000 144Quotation drawing (component) A 928 000 146Technical dataNo. of poles 55Type of seal (plug)By an optional rubber grommet at cableoutletType of seal (cable)By an optional rubber grommet at cableoutletType of locking (plug) With steel leverVibration resistance3 gTemperature range, min./max. -40 / 85 °CContact spacing5 mmRow spacing2.80 mmApplicationsBodywork attachmentDegree of protectionIP30, IP54KBosch Automotive Aftermarket 2008 | 2009