Low-way plug-in connections - MECS

High-way plug-in connections| 151High-way plug-in connections46-way plug-in connection (GD)General informationIllustrationTechnical descriptionThe 46-way wiring-harness connector is a compact high-way plug-inconnection for ASR/ESP control units.A silicone gel seal (BMK 0.6) or individual wire seals (MCP 2.8) are used forthe cable. Thanks to the gel seal, no additional sealing (e.g. dummy plugs)is required for non-used signal pins (BMK 0.6) (refer to product informationon silicone gel seal). A lever/claw system is used for pull-in and locking.FeaturesE Sealed plug-in connectionE Low insertion forceE Integrated secondary lockE Silicone gel seal (GD) and individual wire sealE High-current contactsE Signal-current contactsTechnical featuresE Vibration resistance: 3 gE Temperature range: -40° C…+120° CE Degree of protection: IP X4K, X6K, X9KE Connection cross-sections:1.5…4.0 mm 2 (MCP 2.8)0.5…0.75 mm 2 (BMK 0.6)E Suitable contacts:4x MCP 2.8 with individual wire seal42x BMK 0.6E Contact spacing/posts BMK 0.6: 2.5 mm x 3.5 mm/0.63 mmAll currently applicable quotation drawings and technical customer documentation for the 46-way plug-in connection (GD) product category can befound in the internet under www.bosch-connectors.com.Pre-assembled 46-way contact carrierIllustrationProduct informationProduct codeVHP-46PDesignation46-way wiring-harness connectorPart number 1 928 404 563Quotation drawing (assembly) A 928 000 632Quotation drawing (component)D 928 003 15ATechnical dataNo. of poles 46Outgoing cable direction (KR) LeftType of seal (cable)Silicone gel seal/individual wire sealType of locking (plug) Using a lever/claw systemVibration resistance3 gTemperature range, min./max. -40 / 120 °CContact spacing2.5 mmApplicationsBodywork attachmentDegree of protectionIP X 4,6,9 K2008 | 2009 Bosch Automotive Aftermarket