Low-way plug-in connections - MECS

Low-way plug-in connections| 75Low-way plug-in connectionsCompact 3 (2..6-way)General informationIllustrationTechnical descriptionThe compact connector Compact 3 is used for the connection of suchautomotive electronic assemblies as sensors and actuators.The plug-in connection has a radial seal and has individual wire seals forthe wiring.The plug-in connection is suitable for engine-compartment installationand for engine-mounted components. For greater contact reliability, theconnector features a secondary lock. The compact connector is connected(disconnected) directly. Proper connection of the plug to the interfacecan be checked using the slide (CPA). The slide can only be locked if theconnector has been fitted correctly.FeaturesE Check slide (CPA)E Sealed plug-in connectionE No. of contacts 2…5E Individual wire sealE Secondary lockTechnical featuresE Vibration resistance: 20...30 g (depending on number of poles)E Temperature range: -40...+150° C (contact with gold-plated surface)E Degree of protection: IP X4K, X6K, X9KE Connection cross-sections: 0.5…2.5 mm 2E Suitable contacts: BDK 2.8 (advanced version of BSK 2.8)with individual wire sealE Contact spacing/posts: 5 mm/2.8 mmAll currently applicable quotation drawings and technical customer documentation for the Compact 3 (2..6-way) product category can be found inthe internet under www.bosch-connectors.com.2-way end clipIllustrationProduct informationProduct codeVNP-KOMP1-2/3PDesignation Compact connector 1Part number 1 928 403 422Quotation drawing (component) 1 928 A00 257Technical dataNo. of poles 2Color (FA)BlackSecondary lockNoneType of seal (plug)Radial sealType of seal (cable)Individual wire sealType of locking (plug) With plastic lugVibration resistance25 gDimensions (L x W x H) 11.50 x 7.10 x 17.40 mmTemperature range, min./max. -40 / 150 °CContact spacing5 mmRow spacing2.80 mmApplicationsBodywork attachmentDegree of protectionIPX4K, IPX9K2008 | 2009 Bosch Automotive Aftermarket