Low-way plug-in connections - MECS

20 |Low-way plug-in connectionsLow-way plug-in connectionsJetronic coupler plugsGeneral informationIllustrationTechnical descriptionThe coupler plug is used as a break connector.The corresponding female plug is the Jetronic plug. The plug-in connectionhas an interfacial seal in the Jetronic plug. An individual wire sealingsystem is used for the wiring. The coupler plug is suitable for bodyworkand engine attachment. It can be attached to the vehicle by means of aplastic or metal holder.FeaturesE Coupler for Jetronic plugE Sealed designE 4 encoding optionsE 2.8 mm flat blade can be fittedE Mount for vehicle attachmentTechnical featuresE Vibration resistance: 10 gE Temperature range: -40°C…+130° CE Degree of sealing: IP X6K, X7, X9K, 6KX (dust)E Connection cross-sections: 0.2…2.5 mm 2E Suitable contacts: Flat blade 2.8 mmE Contact spacing: 5 mmAll currently applicable quotation drawings and technical customer documentation for the Jetronic coupler plug product category can be found inthe internet under www.bosch-connectors.com.2-way Jetronic coupler plugIllustrationProduct informationProduct codeVNP-KUPPDesignationCoupler plugPart number 1 224 485 018Quotation drawing (component)C 928 003 16ATechnical dataNo. of poles 2Color (FA)BlackEncoding 1Secondary lockNoneType of contact2.8 tapType of seal (plug)By axial seal at wiring-harness connectorType of seal (cable)Rubber grommetVibration resistance10 gDimensions (L x W x H) 19.40 x 16.75 x 27.00 mmTemperature range, min./max. -40 / 130 °CRow spacing1.00 mmApplicationsEngine attachmentBosch Automotive Aftermarket 2008 | 2009