Low-way plug-in connections - MECS

Low-way plug-in connections| 33Low-way plug-in connectionsCompact 1.1 (2..5-way)General informationIllustrationTechnical descriptionThe compact connector Compact 1.1 is used for the connection of suchautomotive electronic assemblies as sensors and actuators.The plug-in connection has a radial seal and individual wire seals forthe wiring. The plug-in connection is suitable for engine-compartmentinstallation and engine-mounted components.The compact connector is connected (disconnected) directly and lockedby a plastic lug.FeaturesE BDK contact (advanced version of BSK contact)E Sealed plug-in connectionE No. of contacts 2, 3, 5E Individual wire sealE Less space requiredTechnical featuresE Vibration resistance: 20...30 g (depending on number of poles)E Temperature range: -40...+150° C (contact with gold-plated surface)E Degree of protection: IP X4K, X9KE Connection cross-sections: 0.5…2.5 mm 2E Suitable contacts: BDK 2.8 (advanced version of BSK 2.8) with individualwire sealE Contact spacing/posts: 5 mm/2.8 mmAll currently applicable quotation drawings and technical customer documentation for the Compact 1.1 (2..5-way) product category can be found inthe internet under www.bosch-connectors.com.2-way end clipIllustrationProduct informationProduct codeVNP-KOMP1-2/3PDesignation Compact connector 1Part number 1 928 403 422Quotation drawing (component) 1 928 A00 257Technical dataNo. of poles 2Color (FA)BlackSecondary lockNoneType of seal (plug)Radial sealType of seal (cable)Individual wire sealType of locking (plug) With plastic lugVibration resistance25 gDimensions (L x W x H) 11.50 x 7.10 x 17.40 mmTemperature range, min./max. -40 / 150 °CContact spacing5 mmRow spacing2.80 mmApplicationsBodywork attachmentDegree of protectionIPX4K, IPX9K2008 | 2009 Bosch Automotive Aftermarket