Low-way plug-in connections - MECS

194 |High-way plug-in connectionsHigh-way plug-in connections134-way plug-in connectionGeneral informationIllustrationTechnical descriptionThe 134-way plug-in connection is used for the connection of Motroniccontrol units in protected installation locations.The plug-in connection consists of five modules: 2x 9-way modules eachwith one contact carrier (for 2.8 mm power contacts) and 1x 24, 40and 52-way modules each with two contact carriers (for 0.64 mm signalcontacts). The contact carriers can be pre-assembled. The individualmodules permit an inexpensive wiring-harness design. The modules canalso be used separately. Outgoing cable options are available.FeaturesE With secondary lockE Modular designE Modules with power contactsE Modules with signal contactsTechnical featuresE Vibration resistance: approx. 3.5 gE Temperature range: -40° C…+85° CE Degree of sealing: IP 30E Connection cross-section:0.5…2.5 mm 2 (JPT)0.5…0.75 mm 2 (MQS)E Suitable contacts:JPTMQSE Contact spacing/posts:JPT 5 mm/2.8 mmMQS 2.54 mm/0.63 mmAll currently applicable quotation drawings and technical customer documentation for the 134-way plug-in connection product category can be foundin the internet under www.bosch-connectors.com.12-way contact carrierIllustrationProduct informationProduct codeVHP-134PDesignation134-way wiring-harness connectorPart number 1 928 403 632Quotation drawing (assembly)D 928 002 39AQuotation drawing (component)C 928 002 48ATechnical dataNo. of poles 12Color (FA)BlackEncodingLSecondary lockSliding pinType of contactMQSVibration resistance4 gDimensions (L x W x H) 16.00 x 7.60 x 16.00 mmTemperature range, min./max. -40 / 85 °CContact spacing5 mmRow spacing2.00 mmApplicationsBodywork attachmentDegree of protection IP 30Other features (SO)Module 2, left halfBosch Automotive Aftermarket 2008 | 2009