Low-way plug-in connections - MECS

130 |High-way plug-in connectionsHigh-way plug-in connections35-way plug-in connection with EADGeneral informationIllustrationTechnical descriptionThe 35-way wiring-harness connector is a sturdy plug-in connection for usein the engine compartment.The plug-in system is immersion-proof and was developed for enginecontrol units in trucks. Use is made of an axial seal for the plug-inconnection and individual wire seals for the wiring. The outgoing cable maybe routed towards the encoding mounting element. The plug-in connectioncan only be made with the secondary lock fastened. Pull-in and locking areimplemented by way of a metal lever.FeaturesE Sealed plug-in connectionE Secondary lockE Suitable for use up to 110°CE Softline designE Two contact sizesE 8 encoding optionsTechnical featuresE Vibration resistance: 7 gE Temperature range: -40° C…+110° CE Degree of sealing: IP X6K, X7, X9KE Connection cross-section: 0.35…2.5 mm 2 (JPT)E Suitable contacts: 35x JPTE Blade: JPT 2.8 mmAll currently applicable quotation drawings and technical customer documentation for the 35-way plug-in connection with EAD product category canbe found in the internet under www.bosch-connectors.com.Clamp-type adapterIllustrationProduct informationProduct codeVHP-35PDesignation35-way wiring-harness connectorPart number 1 928 401 962Quotation drawing (assembly) A 928 000 130Quotation drawing (component)C 928 001 24ATechnical dataNo. of poles 35Color (FA)BlackSecondary lockNoneType of seal (plug)By an optional rubber grommet at cableoutletType of seal (cable)By an optional rubber grommet at cableoutletType of locking (plug) With steel leverVibration resistance3 gDimensions (L x W x H) 22.00 x 10.50 x 8.50 mmTemperature range, min./max. -40 / 85 °CContact spacing5 mmRow spacing2.80 mmApplicationsBodywork attachmentDegree of protectionIP30, IP54KBosch Automotive Aftermarket 2008 | 2009