Low-way plug-in connections - MECS

24 |Low-way plug-in connectionsLow-way plug-in connectionsCompact 1 (2..7-way)General informationIllustrationTechnical descriptionThe compact connector Compact 1 is used to connect electronicassemblies such as sensors and actuators in motor vehicles.The plug-in connection has a radial seal and individual wire seals forthe wiring. The plug-in connection is suitable for engine-compartmentinstallation and engine-mounted components. The compact connectoris connected (disconnected) directly and locked by a plastic lug.FeaturesE Sealed plug-in connectionE No. of contacts 2...7E Individual wire sealE Less space requiredTechnical featuresE Vibration resistance: 25...30 g (depending on number of poles)E Temperature range: -40...150° C (contact with gold-plated surface)E Degree of protection: IP X4K, IP X9KE Connection cross-sections: 0.35...2.5 mm 2E Suitable contacts: JPT with individual wire sealE Contact spacing/posts: 5 mm/2.8 mmAll currently applicable quotation drawings and technical customer documentation for the Compact 1 (2..7-way) product category can be found inthe internet under www.bosch-connectors.com.3-way compact connectorIllustrationProduct informationProduct codeVNP-KOMP1-2/3PDesignation Compact connector 1Part number 1 928 402 868Quotation drawing (component)D 928 000 90ATechnical dataNo. of poles 3Color (FA)BlackEncoding 1Secondary lockNoneType of contactJPTType of seal (plug)Radial sealType of seal (cable)Individual wire sealType of locking (plug) With plastic lugVibration resistance25 gDimensions (L x W x H) 23.20 x 19.00 x 30.40 mmTemperature range, min./max. -40 / 150 °CContact spacing5 mmRow spacing1.00 mmApplicationsEngine attachmentDegree of protectionIPX 4K, 9KOther features (SO)No shield/no sleeve connectionBosch Automotive Aftermarket 2008 | 2009