Low-way plug-in connections - MECS

134 |High-way plug-in connectionsHigh-way plug-in connections38-way plug-in connectionGeneral informationIllustrationTechnical descriptionThe 38-way wiring-harness connector is a compact high-way plug-inconnection particularly suitable for complex hybrid control units whichhave to satisfy engine attachment conditions.Use is made of a silica gel seal for the cable. This means there is no needfor additional sealing (e.g. dummy plugs) if not all contacts are used(refer to product information on silica gel seal). Pull-in and locking areimplemented by way of a metal lever.FeaturesE Sealed plug-in connectionE For confined spacesE Suitable for use up to 130°CE Silicone gel sealE For high vibration resistanceTechnical featuresE Vibration resistance: 20 gE Temperature range: -40…+130° CE Degree of protection: IP 54K, IP 69KE Connection cross-sections: 0.5…0.75 mm 2E Suitable contacts: BMK 0.6E Contact spacing/posts: 2.5 mm/0.64 mmAll currently applicable quotation drawings and technical customer documentation for the 38-way plug-in connection product category can be foundin the internet under www.bosch-connectors.com.37/38/64-way sleeveIllustrationTechnical dataColor (FA)CommentsBlackGrooved tube OD 19 - 24 mmProduct informationProduct codeVDI-TUEDesignationProtective cap / sleevePart number 1 928 300 520Quotation drawing (assembly) A 928 000 218Quotation drawing (component)C 928 001 74ABosch Automotive Aftermarket 2008 | 2009