gb use and maintenance manual blast chiller/shock freezer

7. EXTRAORDINARY MAINTENANCEThe information in this section is intended for skilled personnel.- Clean the condenser filter periodically.- Check the door seals and ensure that they are providing an airtight seal.- Check that the electrical system complies with the regulations in force.- Check the surround heating elements and the defrosting element (using a clamp meter).In case of repair or replacement of parts, always state the code and the serial number of the appliance, which willbe found on the nameplate.8. WASTE DISPOSAL AND DEMOLITION8.1 STORING WASTESpecial waste may be stored provisionally pending disposal by means of treatment and/or definitive storage. Theenvironmental protection laws in the user's country must always be complied with.8.2 BASIC PROCEDURES FOR DISMANTLING THE APPLIANCEThe legislation in force in the various countries varies; take care to comply with the law in force in the countrieswhere demolition takes place.In general, the cold storage appliance must be returned to the dealer or to specialized centres for collection or disposal.When dismantling the appliance, group the components together on the basis of their chemical nature. Rememberthat the compressor contains lubricating oil and coolant fluid, which can be recovered and reused, and that theappliance components are special waste which may be treated in the same way as municipal waste.THE APPLIANCE MUST BE DISMANTLED BY SKILLED PERSONNEL.9. ENCLOSED DOCUMENTATION- Technical data- Electric system diagrams- Declaration25