Samsung D860 - User Manual_7.59 MB, pdf, ENGLISH

Self-timer ( ✢ ) / Right button
When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer ( ✢ ) button. This function is used when the
photographer would also like to be in the image.
If you operate the Self-timer button during the self-timer operation,
the self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
In Movie Clip mode, only the 10SEC self-timer will work.
If [Motion Timer] is set, [Self Portrait] cannot be selected.
Selecting the self-timer
1. Rotate the Mode dial to select a desired
RECORDING mode.
2. Press the SELF-TIMER / RIGHT ( ✢ ) button
until the desired mode indicator displays on the
LCD monitor. A 10 second, 2 second, Double
self-timer or Motion timer icon appears on the
LCD monitor.
3. When you press the SHUTTER button, the
picture will be taken after the specifi ed time
has elapsed.
[Selecting the 10 SEC
self-timer]
Self-timer mode indecator
Icon Mode Description
✢
✡
✣
10SEC
self-timer
2SEC
self-timer
Double
self-timer
Motion
Timer
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
Pressing the shutter button will allow an interval of 2
seconds before the image is taken.
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken. When
using the fl ash, the 2-second self-timer may be
delayed for longer than 2 seconds depending on
the fl ash charging time.
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
30 _RECORDING