istruzioni di installazione e uso calandre mcm use and ... - IMESA SpA
istruzioni di installazione e uso calandre mcm use and ... - IMESA SpA
istruzioni di installazione e uso calandre mcm use and ... - IMESA SpA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E071001X 12/10/07<br />
31. WORKING: USE OF A MACHINE WITH FOLDING SYSTEM<br />
HOW TO CHANGE THE FOLDING CONFIGURATION<br />
In order to change the fol<strong>di</strong>ng configuration, while the machine is working, touch the icon nr. 4.<br />
ATTENTION: if a cloth has already been introduced <strong>and</strong> the machine is doing the fol<strong>di</strong>ng, this<br />
icon cannot be selected. In this case the icon is barred by a red x.<br />
ATTENTION: the ironer can fold clothes with a minimum length of 800mm <strong>and</strong> maximum<br />
length of 3752mm.<br />
Once the icon is touched, the one or two line fol<strong>di</strong>ng system screen management appear:<br />
At <strong>di</strong>splay appear the actual configuration, which is green colored.<br />
The configuration of working in one line can be selected on the screen above part: in this case the ironer is<br />
doing the fold on all the ironing length.<br />
The configuration of working in two independen line can be selected on the below screen part: in this case<br />
the ironer is fol<strong>di</strong>ng on two independent line. Each line has a length equal to the half of the entire ironing<br />
length.<br />
In case the on line configuration is selected, the following screen will appear:<br />
4.1a<br />
4.1b<br />
4.1c<br />
4.1d<br />
The icon column is refering to the only ironing line.<br />
The wished fold can be selected touching the icons 4a, 4b, 4c e 4d.<br />
If the icon 4.1a is green, than the machine do no folds.<br />
If the icon 4.1b is green, than the machine do one fold.<br />
If the icon 4.1c is green, than the machine do two folds.<br />
46