Sfogliabile_Applicazioni_Laser_maggio_57

essere ottimizzato il processo di penetrazione, l’utente
indica solo il materiale e lo spessore, utilizzando una
scelta del programma, e avvia il processo. Il CNC inizia
quindi il processo di taglio senza alcun ritardo.
Il sensore può essere montato sia come ampliamento
sul ProCutter sia direttamente nel laser “All-In-Light”.
Il montaggio nel laser offre alcuni vantaggi come la
protezione del sensore, in quanto viene spostato dalla
zona del processo all’apparecchio laser. Inoltre, viene
mantenuta una struttura compatta con un peso ridotto
della testa di taglio ProCutter, anche nella variante con
uscita verticale della fibra.
l
Sisma S.p.A.
via dell’Industria, 1
36013 Piovene Rocchette (VI)
tel. 0445 595511 - info@sisma.com
sisma.com
all-around solution for applications requiring high cutting speeds with
brilliant edge quality in the whole sheet thickness range for steel, aluminum,
and non-ferrous metals.
Activating the EdgeTec functionality leads to an automatic change of
the set-up of the cutting head and laser with a negligible activation time
of a few hundred milliseconds. Brilliant cuts on metal sheets with thicknesses
of up to 30 mm can be achieved with minimal burr formations
and roughness values of less than 100 µm. Significant improvements
in the quality of cut edges have also been achieved when cutting aluminum.
EdgeTec technology offers laser cutting machine manufacturers
the opportunity to equip their machines in a more competitive and
flexible way - cutting thin and thick metal sheets with only one tool.
Leading-edge consumers have already embraced EdgeTec technology,
and will present their machines with this feature at the major Autumn
trade fairs in Germany, China, and the U.S.
The technology package
for automated piercing
A comprehensive systems solution also requires a particular focus on
the piercing process. In response to this need, the technology package
PierceTec enables an autonomous piercing with high speed and excellent
quality.
The sensor measures and evaluates process data online and takes over
the laser control. The progress of piercing is constantly monitored in a
complex control process, where laser parameters are optimized in real
time based on the received data. The heat-affected zone as well as piercing
holes are minimized. Due to this consistently high quality, ideal requirements
for the cutting process may be achieved.
The electronics serve as a link between the CNC-control and the laser. If
not used, the signals of the CNC are directly passed to the laser. During
the piercing process, a built-in electronic unit takes over and ensures
optimal piercing. The user only needs to start the process after indicating
the type of material and the thickness utilizing a simple program selection.
The CNC then starts the cutting process without any delay once the
piercing has been performed.
l
SWT
Sistema laser di saldatura
e riparazione stampi
maggio giugno 2017
Vieni a trovarci a
FIP LYON - Lione, 13-16 giugno 2017 - stand L29
RAPID.TECH - Erfurt, 20-22 giugno 2017 - stand 2-909
LASERWORLD OF PHOTONICS - Monaco, 26-29 giugno - stand A3-405