Manual de Instrucciones

ENGLISH10 Secure workpieceUse clamps or a vice to hold the workpiece. It issafer and it frees both hands to operate the tool.11 Do not overreachKeep proper footing and balance at all times.12 Avoid unintentional startingDo not carry the plugged-in tool with a finger onthe switch. Be sure that the switch is releasedwhen plugging in.13 Stay alertWatch what you are doing. Use common sense.Do not operate the tool when you are tired.14 Disconnect toolShut off power and wait for the tool to come to acomplete standstill before leaving it unattended.Unplug the tool when not in use, before servicingor changing accessories.15 Remove adjusting keys and wrenchesAlways check that adjusting keys and wrenches areremoved from the tool before operating the tool.16 Use appropriate toolThe intended use is described in this instructionmanual. Do not force small tools or attachmentsto do the job of a heavy-duty tool. The tool willdo the job better and safer at the rate for which itwas intended.Warning! The use of any accessory orattachment and performance of any operationwith this tool, other than those recommended inthis instruction manual may present a risk ofpersonal injury.17 Do not abuse cordNever carry the tool by its cord or pull it todisconnect from the socket. Keep the cord awayfrom heat, oil and sharp edges.18 Maintain tools with careKeep the tools in good condition and clean forbetter and safer performance. Follow theinstructions for maintenance and changingaccessories. Inspect the tool cords at regularintervals and, if damaged, have them repaired byan Elu authorized repair agent. Inspect theextension cords periodically and replace them ifdamaged. Keep all controls dry, clean and freefrom oil and grease.19 Check for damaged partsBefore using the tool, carefully check it fordamage to ensure that it will operate properlyand perform its intended function.Check for misalignment and seizure of movingparts, breakage of parts and any other conditionsthat may affect its operation. Have damagedguards or other defective parts repaired orreplaced as instructed. Do not use the tool if theswitch is defective. Have the switch replaced byan Elu authorized repair agent.20 Have your tool repaired by an Elu authorizedrepair agentThis Power Tool is in accordance with therelevant safety regulations. To avoid danger,electric appliances must only be repaired byqualified technicians.Package contentsThe package contains:1 Jigsaw3 Blades1 Anti-splinter shoe insert1 Dust extraction adaptor1 Anti-scratch shoe cover (ST84EK/ST74EK)2 Allen keys (ST82K/ST72K)1 Allen key (ST84EK/ST74EK)1 Kitbox1 Instruction manual1 Exploded drawing• Check for damage to the tool, parts or accessorieswhich may have occurred during transport.• Take the time to thoroughly read and understandthis manual prior to operation.Description (fig. A)Your jigsaw has been designed for professionalcutting of wood, steel, aluminium, PVC or ceramicmaterial.1 On/off-switch2 Variable speed control dial (ST84EK/ST74EK)3 Lock-on button (ST84EK/ST82K)3 Motor housing (ST74EK/ST72K)4 Pendulum stroke selector5 Dust extraction adapter6 Shoe7 Guide roller8 Chip extraction shroud9 Blade holder10 Adjusting lever for sawdust blower11 Rotating handle (ST84EK/ST74EK)en - 3 18