TRATAMENTO TÉRMICO DOS AÇOS
TRATAMENTO TÉRMICO DOS AÇOS
TRATAMENTO TÉRMICO DOS AÇOS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9.7 NORMALIZAÇÃO COMPLETA ATRAVÉS DA DIN 17006<br />
A normalização compõe-se de três partes: obtenção, composição e tratamento<br />
posterior. A tabela 7 apresenta uma coleção não-completa.<br />
Tabela 11 – Alguns símbolos auxiliares na identificação dos aços<br />
Obtenção Composição Tratamento<br />
M – forno Siemens Martin<br />
E – forno elétrico<br />
Y – conversor L–D<br />
Fonte: SENAI-SP. Tratamento térmico<br />
AL<br />
C<br />
Co<br />
Cr<br />
Cu<br />
Fe<br />
Mg<br />
Mn<br />
Mo<br />
N<br />
Ni<br />
P<br />
Pb<br />
S<br />
Si<br />
V<br />
W<br />
A = revenido<br />
E = cementado<br />
G = recozido<br />
H = temperado<br />
V = beneficiado<br />
K = laminado e frio<br />
Exemplos:<br />
M St 37<br />
forno Siemens Martin aço comum de uma resistência de 370 N/mm 2<br />
E C 35 V 70<br />
forno elétrico aço ao carbono beneficiado até uma<br />
de 0,35% de C resistência de 700 N/mm 2<br />
M GS 20 K<br />
forno Siemens Martin 0,09%C laminado a frio<br />
0,2% Co Si<br />
93