ATH-Heinl Bedienungsanleitung M72Z Plus

V-BELT TENSIONING
• The machine contains a motor (1) which
drives the worm gear (3) using a V-belt (2).
• In order to tension, you must loosen the
motor fixing screws.
• Next, loosen the counter nut (B)
• The V-belt is tensioned by turning the
screw (A).
o
When pressed down (in the centre),
the V-belt should give by a
maximum of 8 mm.
• The counter nut (B) and all motor fixing
screws must be tightened for final fixing.
• The final stage is to reassemble the cover.
1
2
A
3
PNEUMATIC LOCKING OF THE MOUNTING HEAD
• The force and/or tension of the cylinder is
set by tightening and/or loosening the
screw (B).
• The automatic distance to the rim is set by
tightening and/or loosening the nut (A).
B
SWIVEL SPEED
• The swivel speed to the front and/or rear can
be set by opening and/or closing the valves
(A+B).
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-04
Manufacturer ATH-Heinl GmbH & CO.KG
- 37 -