102386 Kurzbedienungsanleitung FOCX32 ... - Elcon Systemtechnik

34
• Quick Assembly System
• direct splicing using a splice unit and
• the use of pre-assembled connectors
FOCX32
The following sections provide only basic information on these 3 methods. Alternative options
can be applied, according to the local conditions and the preferred requirements.
[Source: Laser 2000 GmbH]
Make sure to comply with the safety requirements for CLASS-1-Laser products as per
EN60825-1.
2.6.1 QuickAssembly Tool for Connector Mounting
Figure 9: Quick Assembly for easy connector pre-mounting
This tool (e.g. QuiAss made by Suhner) serves for full connector assembly on-site. Included
in delivery: heating module, blade, flying knife and power pack (further data – see product
catalogue or data sheet)
Toolkit accessories: SC-connector adapter, toolkit bag with consumables and diverse tools.
2.6.2 Splice unit
A professional solution is the use of a manual splice unit, e.g. the A-S122, V-Nut-
Handspleißgerät FITEL. The FOCX32 makes it possible, by means of a Fiber Management,
to deposit the splice joint while at the same time protecting it. This option provides the lowest
possible total loss and meets best the optical and mechanical quality requirements.
Figure 10: Manual Splice Unit (Example: FITEL Furukawa S122C)
Version: 2009/01/29