102386 Kurzbedienungsanleitung FOCX32 ... - Elcon Systemtechnik

Weitere Magazine

Empfehlungen

Info

4 Important notes 4.1 Manufacturer´s declaration 44 FOCX32 The manufacturer confirms that the ELCONnect coax modem has been designed for the transfer of data information via the coaxial cable network and, subject to its proper usage, complies with the relevant safety standards and the applicable EMC requirements. Note: The device belongs to equipment of class B. 4.2 Recycling 4.3 WEEE-Directive 4.4 Warranty The package material to the devices (cardboard paper, inlet flyer, plastic sheeting and plastic bags) are fully recycleable and shall be disposed accordingly. Following the EU Directive 2002/96/EC of 27 January 2003 on Waste Electrical and Electronic Equipment , such equipment which is put out of service, has to be disposed as required by EU and national law. Electronic devices are no household waste and must not be disposed as domestic waste. Please drop your devices at the end of their useful lifetime at the named collecting points. This documentation compiled by ELCON Systemtechnik GmbH is based on best available technology. However, although applying due diligence, it is impossible to exclude all mistakes and technical inaccuracies. In view of the rapid technological progress, ELCON reserves the right to modifications and improvements without prior notification. For this reason ELCON assumes no liability for the content of this document. Further, ELCON shall not be responsible for any loss or incorrect use of information or data which may result from using this document. In addition, ELCON cannot be held liable for damages, whether direct or indirect (including, but not limited to, financial losses, delayed business transactions, disruption of business or similar consequences), incurred as a result of improper use of the equipment. This documentation has been made to explain the functionality of the ELCONnect coax System. It describes installation and application of the device and its supplementary equipment, drivers and software tools (if required). Detailed information, addressing client-specific solutions, can be taken from the relevant user manual. Further information on the operation of peripheral equipment and installations, in particular about the installation of cable TV networks, computer hardware and the available access technologies, can be received from your telecommunications network operator or Internet Service Provider, or the respective user manuals. Version: 2009/01/29
FOCX32 Note: This documentation may describe performance features which cannot be used in the specific application case. 4.5 Rights and trademarks With respect to the information contained in this documentation ELCON accepts no warranties as for the non-existence of industrial property rights (trademarks, patents, utility models, etc.). Generally used trademarks, trade names, company and product names are subject to the respective trademark, patent, utility model or registered design rights. The information in this document must not be copied, neither in full nor in extracts, translated, reprinted or transferred in any other way. The purchase of software and equipment shall be governed by the General Conditions for the Sale of Products and Services and the License Conditions of ELCON Systemtechnik GmbH. Version: 2009/01/29 45
Seite 1 und 2: coax Fiber Optical Coax MDU FOCX32
Seite 3 und 4: FOCX32 • Warnung vor gefährliche
Seite 5 und 6: FOCX32 • Warning of dangerous las
Seite 7 und 8: FOCX32 Contents ENGLISH ...........
Seite 9 und 10: FOCX32 ELCONnect coax Master32 Gate
Seite 11 und 12: FOCX32 1.4 Aufbau ELCONnect coax FO
Seite 13 und 14: FOCX32 Das Gerät darf nicht an bre
Seite 15 und 16: FOCX32 Anschlussadapter Bild 7: Kab
Seite 17 und 18: FOCX32 Aktuelle Spleißgeräte sind
Seite 19 und 20: FOCX32 2.8 Anschließen der Verbind
Seite 21 und 22: FOCX32 Fernspeisenetzteil Fernspeis
Seite 23 und 24: FOCX32 2.11 Anzeigeelemente (LEDs)
Seite 25 und 26: FOCX32 CATV Durchgangsdämpfung typ
Seite 27 und 28: FOCX32 gangstechnologien informiere
Seite 29 und 30: FOCX32 ELCONnect coax Master32 Gate
Seite 31 und 32: FOCX32 1.4 Structure of the ELCONne
Seite 33 und 34: FOCX32 The device must not be mount
Seite 35 und 36: FOCX32 Adapter connector Figure 7:
Seite 37 und 38: FOCX32 Common splice units can be u
Seite 39 und 40: FOCX32 2.8 Installation of the conn
Seite 41 und 42: FOCX32 60 60 Remote feeding module
Seite 43 und 44: FOCX32 2.11 Display elements (LEDs)
Seite 45: FOCX32 CATV Transmission loss typic

102386 Kurzbedienungsanleitung FOCX32 ... - Elcon Systemtechnik

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?