102386 Kurzbedienungsanleitung FOCX32 ... - Elcon Systemtechnik

2.6.4 Assembly of the optical fiber cable
36
FOCX32
A high-strength cable gland on the bottom right side allows insertion of the optical fiber cable.
This cable gland has been designed in a way that the SC/PC-connector can be easily inserted.
If needed, the cable can be fixed to the ground board by means of a cable strap. The
cable gland contains a rubber seal to protect the inside against environmental impacts on the
housing.
In case of need the spliced part of the optical fiber cable can be positioned on the Fiber Management
Unit, in order to not exceed the max. admissible fiber bending radius and to minimize
the mechanical stress on the spliced fiber. Upon insertion of the optical fiber cable and for
connecting it to the fiber module, the Fiber management unit should be removed.
Figure 12: Fiber management unit with
wound optical fiber
2.7 Potential equalization of the ELCONnect coax FOCX32
Figure 13: SC/PC-Connector with standard
and extended anti-kink sleeve
A potential equalization has to be carried out between the housing of the EL-
CONnect coax FOCX32 and the local earthing point. This is realized by means
of a 4-mm²-copper wire, which serves as connecting element between the earth
circuit connector and the earthing clamp of the housing (right side above the
mains cable outlet).
Version: 2009/01/29