Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
3.2 Mounting bracket, inverted<br />
The <strong>VPT</strong>-<strong>601</strong> unit may be mounted in an inverted position for special installation conditions. For an inverted mount, follow the same installation instructions as for the<br />
standard mount (above).<br />
ATTENTION: Due to the weight of the unit, EXTRA steps must be taken to secure the fixing screws and prevent them from working loose (e.g. using<br />
Loctite®).<br />
Furthermore, checks must be carried out to establish whether additional safety measures, such as a safety cable etc., are necessary as a<br />
result of the structural conditions.<br />
The installer shall be personally responsible for ensuring that the unit is properly mounted.<br />
Safety cable<br />
(not supplied <strong>with</strong> the unit)<br />
Mounting pedestal/column<br />
Four washers and nuts<br />
Four M6 hex head screws<br />
Base mounting plate<br />
Cardboard mounting disc<br />
(remove after tightening nuts on mounting fixture.)<br />
Mains adaptor & slip ring signal transmission<br />
<strong>Pan</strong>/<strong>Tilt</strong> head<br />
Output shaft<br />
27