Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Pan/Tilt Head with Multiple Protocol Interface VPT-601 ... - Belcom
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Fuses<br />
F1<br />
F2<br />
F3<br />
3,15 A T<br />
6,3 A F<br />
0,125 A F<br />
Jumper positions<br />
SW 1,2<br />
SW 3,4<br />
JP9:<br />
JP13<br />
Position 1-2<br />
Position 2-3<br />
Position 1-2<br />
Position 2-3<br />
Not connected<br />
Not connected<br />
Normal operation<br />
Operation <strong>with</strong> protocol converter board<br />
Cables 7,8 on JP8 carry TX+ and TX- signals for 4-wire controls.<br />
Cables 7, 8 on JP8 carry the contacts outwards from the aux relay 1. *<br />
(Relay contacts can be allocated as NO or NC on the telemetry board.)<br />
The connections for the camera, the lens and the 3 aux. outputs are made through the 24 pin round plug. The supply voltage for the camera is standard 12VDC/1A.<br />
2 motors can be operated via the lens connection lines. 2 analogue inputs are provided for zoom and focus for position finding by potentiometer. Reference voltages are<br />
also drawn through this plug.<br />
Plug contact assignment is shown in table 1.<br />
* Relay contacts:<br />
Maximum permitted switching current:<br />
0.5A at 125VAC,<br />
1.0A at 24VDC<br />
31