DMA 35 Portable Density/Specific Gravity/ Concentration Meter - Alber

EN2 Safety Instructions• Read this instruction manual before using the portable density meter DMA 35.• Follow all hints and instructions contained in this instruction manual to ensurethe correct use and safe functioning of DMA 35.Liability• This instruction manual does not claim to address all safety issues associatedwith the use of the instrument and samples. It is your responsibility to establishhealth and safety practices and determine the applicability of regulatorylimitations.• Anton Paar GmbH only warrants the proper functioning of DMA 35 if noadjustments have been made to the mechanics, electronics, and firmware.• Only use DMA 35 for the purpose described in this instruction manual. AntonPaar GmbH is not liable for damages caused by incorrect use of DMA 35.Installation and use• DMA 35 and DMA 35 Tag&Log are not explosion-proof instruments andtherefore must not be operated in areas with risk of explosion.• Never remove the pump lock and battery cover in hazardous areas. Onlyexchange the batteries outside of hazardous areas.• The installation procedure shall only be carried out by authorized personnel whoare familiar with the installation instructions.• Do not use any accessories or wearing parts other than those supplied orapproved by Anton Paar GmbH.• Make sure all operators are trained to use the instrument safely and correctlybefore starting any applicable operations.• In case of damage or malfunction, do not continue operating DMA 35. Do notoperate the instrument under conditions which could result in damage to goodsand/or injuries and loss of life.• Check DMA 35 for chemical resistance to the samples and cleaning liquids.• Do not expose the instrument to temperatures below 0 °C (32 °F) if water iscontained in the measuring cell or pump (freezing water will cause rupture of themeasuring cell).10 C96IB01