und Bedienungsanleitung für den Garagentorantrieb ... - Rademacher

iFunctional descriptionGBIntelligent microcomputerIntelligent, computerized, exact positioning of travel,prompt power determination, reverses if obstructionsare met.Door operatorLow noise, soft start and soft stop protect the motorand ensure a long service life.Self diagnosisOperational mode and digital menu shown on thedisplay, self diagnosis.(L-Normal, F-Interrupted, H-FailIn Reading, A-Infrared Ray Interrupted)CryptoguardRolling code technology provides billions of codecombinations and makes every remote control a uniqueone that protects against unauthorized access.Alarm unitThe alarm sounds when the door is left open for longerthan 10 minutes. The alarm stops when the door isclosed again (refer to „Alarm setting“ on page 51).Emergency release deviceThe door can be manually operated by pulling down onthe emergency release cable in the case of power failure.Automatic closing function AutomatischeSchließfunktionThe automatic closing time of the door can be set from30 to 240 seconds (refer to page 51/52).2000 cycle alarm2000-Zyklen-AlarmWhen the operator has run 2000 cycles, it will beep toremind the user to service the mechanical system (referto page 52).LightingThe S2 garage door operator has internal lighting whichis switched on after each switching impulse and goesoff again automatically after 3 minutes.Additional connecting options for externalaccessories and safety unitIn addition you can connect an external switch and aninfrared photoelectric barrier (refer to page 55).iFunctional description / Recognition of obstructionsThe door operator has an automatic obstacle-recognitionsystem (through internal monitoring of power).If the door encounters an obstruction when closing oropening, the door operator stops the door automaticallyand moves it in the opposite direction until it reachesthe corresponding limit.After removing the obstruction you can operate thegarage door operator normally again.36