thi_forschungsbericht_2017

Publikationen
113
Fleischmann, A., Schmidt, W., Stary, C. (2015):
Requirements Specification as Executable Software
Design – A Behavior Perspective, Joint Proceedings
of REFSQ-2015 Workshops. Proceedings of the 1st
Workshop on Continuous Requirements Engineering
CRE‘15. Essen, Germany, 23.03.2015, p. 9-18.
Gold, R. (2015): A uniform approach to control flow
graphs of programs. Far East Journal of Applied
Mathematics, 93 (1), p. 27-49.
Großmann, D., Bregulla, M., Banerjee, S., Cupek,
R., Ziebinski, A., Zonenberg, D (2015): Simple
Connectivity to Enterprise Systems. OPC Day Europe
2015. Paris, France, 19.-20.05.2015.
Hanß, A., Klein, M., Liu, E, Derix, R., Elger, G., Schmid,
M. (2015): Analysis of new direct on PCB board
attached High Power Flip-Chip LEDs. IEEE 65th
Electronic Components and Technology Conference
(ECTC). San Diego, USA, 26.-29.05.2015.
Hanß, A., Liu, E, Schmid, M., Elger, G. (2015): The
Influence of Voids in Solder Joints on Thermal
Performance and Reliability Investigated with
Transient Thermal Analysis. 21th IEEE International
Workshop on THERMAL INVESTIGATIONS OF IC´S AND
SYSTEMS (Therminic 2015). Paris, France, 30.09.-
02.10.2015.
Hanß, A., Schmid, M., Liu, E, Elger, G. (2015):
Transient thermal analysis as measurement method
for IC package structural integrity. Chinese Physics
B, 24 (6), 068105.
Hartmann, C., Harlapur, S., Brandmeier, T., Akshay,
R., Faisst, H., Lauer, P. (2015): New Integrated
Assistance Functions For Real World Accident
Scenarios. ESV Tagung. Göteborg, Sweden,
11.06.2015.
Hastreiter, S., Schröder, J., Tomanek, D. P.,
Friederich, P., Woratschek, H., Stadtelmann,
M., Lindner, A. (2015): Benchmarking-Studie
OP-Personaleinsatzplanung. In: Woratschek,
H., Schröder, J., Eymann, T., Buck, M. (Hrsg.):
Wertschöpfungsorientiertes Benchmarking:
Logistische Prozesse in Gesundheitswesen und
Industrie. Springer, Berlin, S. 213-235.
Hauber, J., Huber, K. (2015): Das neue GKI-Verfahren
zur motorischen Bewertung der Klopffestigkeit von
Ottokraftstoffen. Erdöl Erdgas Kohle (EEK), 131 (5),
S. 201-206.
Hempen, T., Brandmeier, T. (2015): Simulation-based
Testing of ADAS. SafetyAssist. Aschaffenburg,
Germany, 19.05.2015.
Herrmann, S., Utschick, W., Botsch, M., Keck, F.
(2015): Supervised Learning via Optimal Control
Labeling for Criticality Classification in Vehicle
Active Safety. IEEE International Conference on
Intelligent Transportation Systems 2015. Las Palmas
de Gran Canaria, Spain, 15.-18.09.2015.
Hüneke, M., Duschner, T., Zörner, W. (2015):
100% Solar Powered Energy Systems for Tourist
Lodges in Southern Africa – the Planet Baobab
Lodge in Botswana as an Example. International
Conference on Clean Energy for Sustainable Growth
In Developing Countries. Palapye, Botswana, 16.-
18.09.2015.
Hüneke, M., Kapfhamer, S., Zörner, W., Donald
K., Joseph E. M., Moseki R. M. (2015): The
NEED Project – Paving the Way for Widespread
Implementation of Renewable Energy Technologies
in the Southern African Region. International
Conference on Clean Energy for Sustainable Growth
In Developing Countries. Palapye, Botswana, 16.-
18.09.2015.
Jardan, R. K., Varga, Z., Stumpf, P., Nagy, I., Endisch,
C., Sipos, P., Simon, M. (2015): Development of a
dedicated laboratory system for measurement of
iron losses in high speed PMSM. Proceedings of
the IEEE International Conference on Industrial
Technology (IEEE ICIT). Seville, Spain, 17.-19.03.2015,
p. 708–713.
Jardan, R. K., Varga, Z., Stumpf, P., Nagy, I., Endisch,
C., Sipos, P., Simon, M. (2015): Laboratory System for
Measurement of Iron Losses in High Speed PMSM.
Proceedings of the 3rd. European Conference on
Renewable Energy Systems (ECRES2015). Antalya,
Turkey, 07.-10.10.2015, p. 1-6.
Javied, T., Rackow, T., Franke, J. (2015):
Implementing Energy Management System to
Increase Energy Efficiency in Manufacturing
Companies. Procedia CIRP 26, p. 156–161.
Jehle, F., Woratschek, H., Schröder, J.,
Horbel, C., Tomanek, D. P., Stadtelmann, M.,
Weismann, F. (2015): Benchmarking-Studie
Patiententransportlogistik (PTL). In: Woratschek,
H., Schröder, J., Eymann, T., Buck, M. (Hrsg.):
Wertschöpfungsorientiertes Benchmarking:
Logistische Prozesse in Gesundheitswesen und
Industrie. Springer, Berlin, S. 155-181.
Keferböck, F., Riener, A. (2015): Strategies for
Negotiation between Autonomous Vehicles and
Pedestrians. Mensch und Computer 2015, Workshop
Automotive HMI. Stuttgart, Germany, 06.-09.09.2015.
Knoppe, M. (Hrsg.) (2015): CSR und Retail
Management. Gesellschaftliche Verantwortung als
zukünftiger Erfolgsfaktor im Handel. Springer, Berlin.
Knoppe, M. (2015): CSR im Retail Management. In:
Schneider, A., Schmidpeter, R. (Hrsg.): Corporate
Social Responsibility – Verantwortungsvolle
Unternehmensführung in Theorie und Praxis.
Springer, Berlin Heidelberg, S. 891-903.
Kostetzer, L., Dimitrov, S., Rudnyi, E. (2015):
Electro-thermal cell simulation with 3D based
equivalent circuit model. 22. DESIGN&ELEKTRONIK-
Entwicklerforum Batterien & Ladekonzepte.
München, Germany, 04.-05.03.2015.
Koval, L., Ritzer, S., Suchandt, T., Dütsch, C. (2015):
Design of an innovative backlash-free drive system
for rotation tables. Electric Drives Production
Conference, EDPC-2015. Nürnberg, Germany, 15.-
16.09.2015, p. 433-436.
Kreitlein, S., Schwender, S., Rackow, T., Franke,
J. (2015): E|Benchmark – A Pioneering Method for
Energy Efficient Process Planning and Assessment
Along the Life Cycle Process. Procedia CIRP 29, p.
56–61.
Kurz, M., Schmidt, W., Fleischmann, A., Lederer,
M. (2015): Examining the applicability of a new
OMG standard for adaptive case management. In:
Ehlers, J., Thalheim, B. (eds.): Proceedings of the
7th International Conference on Subject-Oriented
Business Process Management S-BPM ONE 2015,
Article No. 4.
Liu, E, Hanss, A., Schmid, M., Elger, G. (2015): The
Influence of Phosphor Layer and Sidecoating on the
Thermal Performance and the Structural Function
of Modern Waver Level High Power LEDs. 21th IEEE
International Workshop on THERMAL INVESTIGATIONS
OF IC´S AND SYSTEMS (Therminic 2015). Paris, France,
30.09-02.10.2015.
Martin, J., Vögele, U., Endisch, C. (2015): Effects
of errors in position- and navigation data on
predictive vehicle operational strategy optimization.
Proceedings of the 2015 IEEE International
Conference on Vehicular Electronics and Safety
(ICVES). Yokohama, Japan, 05.-07.11.2015, p.
190–195.
Mürken, M., Simon, M., Pforr, J., Hackner, T. (2015):
Application of a floating H-Bridge converter to
stabilize the automotive Energy Net. Proceedings
of IEEE Energy Conversion and Exposition (ECCE).
Montreal, Canada, 20.-24.09.2015.
Nemtanu, F. C., Nemtanu, M. I., Schlingensiepen, J.
(2015): The Impact of Corporate Social Responsibility
on Smart Cities. European Conference on Business
& Management 2015 (EBMC15). Brighton & Hove, UK,
09.-12.07.2015.
Nemtanu, F., Schlingensiepen, J., Buretea, D. (2015):
Cloudification of urban logistics. Responsible
Entrepreneurship- Vision, Development and Ethics.
Proceedings of the 9th International Conference
for Entrepreneurship, Innovation and Regional
Development. Bucharest, Romania, 23.-24.06.2016.
Notomista, G., Botsch, M. (2015): Maneuver
Segmentation for Autonomous Parking Based
on Ensemble Learning. 2015 International Joint
Conference on Neural Networks (IJCNN). Killarney,
Ireland, 12.-17.07.2015.
Paryanto, Brossog, M., Bornschlegl, M., Franke, J.
(2015): Reducing energy consumption of industrial
robots in manufacturing systems. International
Journal of Advanced Manufacturing Technology, 78
(5/6/7/8), p. 1315-1328.