JB N20 Stage 1 Install Guide
JB N20 Stage 1 Install Guide
JB N20 Stage 1 Install Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Route the <strong>JB</strong> <strong>N20</strong> <strong>Stage</strong> 1 harness and control box to a location that allows you to replace the cover.<br />
Now replace the plastic cover over the brake booster area as shown. Note the position of the <strong>JB</strong> <strong>N20</strong><br />
<strong>Stage</strong> 1 harness near the weather seal.<br />
Finally, press firmly on each side of the engine cover until it snaps into place.