JB N20 Stage 1 Install Guide
JB N20 Stage 1 Install Guide
JB N20 Stage 1 Install Guide
SHOW LESS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Using your fingers, push lightly on the release clip while pulling on the connector to release it. Do not<br />
pull directly on the wires.<br />
Once released, locate the connector pair with purple wires on the <strong>JB</strong> <strong>N20</strong> <strong>Stage</strong> 1 harness. Plug the<br />
small connector into the MAF sensor, with the grey retaining clip in the orientation as shown.
Change language